How to make this card and tag

Cardmaking and Papercraft - - Stamping Knowhow -

1 At­tach a 50x135mm piece of green pat­terned pa­per to the cen­tre of a 140mm square white card. Add three 40x135mm pieces of red pat­terned pa­per to the panel, spac­ing them evenly, as shown.

4 Care­fully erase the pen­cil out­line. Colour the stamped im­ages us­ing mark­ers, as shown. Layer the panel onto a scal­loped square of green card. At­tach panel to the base with sticky fix­ers.

2 Wrap the cen­tre of the panel three times with a piece of green baker’s twine, as shown, and se­cure on the re­verse of the panel with a small dab of glue. At­tach the panel to a 140mm square white base card.

5 Stamp ‘merry & bright’ sen­ti­ment onto a 50x10mm piece of white card in black. Layer onto green card and add to the base with sticky fix­ers. Ap­ply clear Wink of Stella to the stamped im­ages to fin­ish.

3 Trace the star tem­plate from p87 onto a 100mm square white card with a pen­cil. Stamp trees and bor­ders around the edges in green and red. Stamp im­ages in­side the star in black, as shown.

6 For the tag: cover a 76x110mm piece of white card with red and green pat­terned pa­pers. Add a stamped panel and sen­ti­ment with sticky fix­ers. Punch a hole and thread with a piece of green baker’s twine.

Newspapers in English

Newspapers from UK

© PressReader. All rights reserved.