You will need

Pressure-treated softwood: 200mm x 45mm x 8m – cut into 4 x 1,500mm lengths for front and back, 4 x 320mm lengths for ends 50mm x 50mm x 1.5m – cut into 4 x 370mm lengths for corner support posts Roofing lath: 42mm x 22mm x 4m – cut into 2 x 1,300mm lengths for shelf supports, 4 x 300mm lengths for lid supports 100mm x 22mm x 2m – cut into 6 x 320mm for shelves

Scaffold board: 3.2m – cut into 2 x 1,540mm for lid Tape measure, pencil and set square

Hand saw Cordless combi drill or cordless screw driver, plus screw driver bits PZ countersunk wood screws – 40mm, 50mm and 70mm

Paint brush, paint or stain – I used dark grey (graphite) linseed paint Belt sander or sandpaper