We have ignition Recover and ride

Turn the bike’s ignition on and wait a few seconds for the fuel pump and electronics to initialise; if everything lights up as normal, depress the starter button and allow the engine to crank over. If it doesn’t start only keep the starter motor running for 15 seconds at a time. If you keep it running too long it could overheat and burn out. Remove the black jump lead from the car first, then carefully unclip it from the bike’s battery terminal. Repeat with the red lead. The bike should continue running without any issue. Let the bike idle until it is warmed up then go for a 15-minute ride. Turn off the ignition, then attempt to restart. All being well, the battery will have recovered with no problems