HOW TO DO IT: INSTALL JUST PLUG LIGHTS
The power supply (WJP5772) and the Light Hub (WJP5701) are two of the fundamental parts of the Just Plug system.
Plug the white plug from the power source into the ‘Power In’ port of the Light Hub. It’s simple to set up and everything is clearly labelled.
The Just Plug range includes single and double street lights, wall-mounted lights, internal lights and even North American style vehicles with working headlamps. These lights come with two fine 91cm wires, plus a Linker Plug.
Each Linker Plug can accept three lights. The red and black buttons on the top just need to be pushed down to allow the wires into the holes.
The plug from the Linker Plug is pushed into one of the four light ports on the Light Hub. Here, two ports have been filled. Each of the four light ports on the Hub can supply three street lights - a total of up to 12 street lights.
Make a hole in the baseboard with a minidrill and a 2.4mm bit. Unclip the Linker Plug, thread the two wires through, re-connect and when you’re happy everything is working properly, fix the light in place with a blob of PVA.