CROSS-PLY VS RADIAL TYRES
The first pneumatic tyre was produced and patented by the now famous Mr Dunlop in 1888, as a way of cushioning the wheels on his son’s tricycle. From a children’s toy to an adult bicycle, the leap was an obvious one and within a decade, Dunlop’s design had become the global standard. His patented method of construction, known in the UK as cross-ply, became the accepted norm for all tyres, from bicycles to trucks, as horses were phased out and the petrol age began. CROSS-PLY TYRES The name cross-ply refers to the way in which the tyre is constructed using a network of interlocking cords which are layered across each other at a 45 degree angle, before being encased in the toughened rubber outer shell. This web of overlapping cords is rigid and highly inflexible, which gives the tyre sidewall a huge amount of strength to withstand impacts. This strength is key, as cross-ply construction is reliant on an inflated inner tube to support the tyre on the rim. As these inner tubes are made of soft rubber, if they become punctured, a flat tyre is the inevitable result, so a hard sidewall is ideal. RADIAL TYRES Invented in France by Michelin in 1948, the radial tyre was a development of the cross-ply design that was able to hold pressurised air within itself through new and more robust methods of construction. By running steel cords at a far wider angle of 90 degrees, and with the addition of steel belts to support the tread area of a tyre, the radial design was able to do away with inner tubes, simplifying production and giving additional benefits of improved ride and handling. Without the need for a hard sidewall, a radial tyre is able to absorb vibrations and shocks far better than a crossply can. With less cording suspended within the rubber, considerably less heat and noise is generated, which not only gives an immediate increase in comfort for the passengers of a vehicle, but it also gives a vast decrease in “blow-out punctures” due to overheating. WHICH TYRE IS RIGHT FOR MY CAR? The first car to be produced with a radial tyre fitted as standard was the 1948 Citroen 2CV. Although this revolutionary design gave immediate benefits in handling, safety and economy, it took a few years to become the industry standard. Seen as a performance upgrade for many, it did not become a standard fitment in Europe until the mid 1960s, and in the USA until 1970. The simple answer is that, if your vehicle was produced before 1948, then it should wear a cross-ply tyre in order to be period-correct, and if made before 1970 and not a sportscar, it was also likely to wear a cross-ply from new. The hard sidewalls of the earlier tyre design makes them likely to follow ridges in a road surface, known as tramlining, and they are also able to produce less traction in corners. Whilst some drivers like the delicacy of steering that a cross-ply gives, it is widely acknowledged that for road use, radial tyres have a clear safety advantage.
For this reason alone, it is now common place for many classic car owners to fit radial type tyres to their cars regardless, as this is no longer seen as being detrimental to a vehicle’s originality. So long as you do not mix tyre types on the same car, there is no reason not to fit radial tyres to your post-war classic car if you wish.