HOW TO USE A PATTERN

Preparing your fabric and cutting out your sewing pattern accurately is just as important as the actual sewing. Wash your fabric before you begin as fabric can shrink and run. Once dry, press it well.

PREPARING THE PATTERN

Patterns often come with several options of different finishes so you may have more pieces than you need. The instruction sheet will tell you which pieces to use. Roughly cut out all of the pieces outside the lines then press the pieces using a dry iron on a low heat to remove the folds and creases.

CUTTING OUT THE PATTERN Choose your size using your measurements and the size chart. Cut along the corresponding lines on your pattern. When you reach any fiddly curves, take care to cut along the correct size lines.

CUTTING LAYOUTS

Choose the correct one for the width of fabric you’re using, the size you’re cutting and the style of garment. Many patterns have more than one option (or view) and each one can have a different layout.

CUTTING OUT

Lay your fabric flat and smooth it out. Fold or place the fabric as shown on the cutting layout. Lay the pattern pieces in the order and right side or wrong side up as shown. Check to make sure that the grainlines on the pattern are parallel with the selvedges by measuring. Pin your pattern pieces carefully in place and cut around them through the fabric using a pair of dressmaker’s shears.

TRANSFERRING MARKINGS

The markings on the pattern pieces need to be transferred to the fabric. They’re really important for matching up fabric pieces later and for positioning elements such as darts and pockets. You can mark these with chalk, fabric markers, snips on the fabric, or with small tacking stitches.

Darts: These lines are for matching up to create darts within the fabric pieces.