Make it Bracket light
1 Drill a hole at the bottom of the angled section of a wooden wall bracket, another hole directly above on the top horizontal piece of the bracket and another on the end of the same piece, furthest from the wall. 2 Source a plug-in pendant light (try the selections at vendimialighting.co.uk), ensuring the flex is long enough to reach your plug socket from where you plan to mount the bracket. 3 attach the bracket to the wall, using screws and wall anchors. Safely remove the plug from your light fitting and feed the flex through the holes, starting with the first hole on the top of the bracket, over and through the end and out of the hole in the angled section of the bracket. 4 Safely re-attach the plug to the flex, and add your bulb and shade of choice to the fitting.