Orvis tip­pet tool £25

Trout Fisherman (UK) - - Gear On Test -

IF you use dif­fer­ent spools of leader on a reg­u­lar ba­sis it makes sense to have them within easy reach, and this spool holder is the per­fect solution. The four-inch long ma­chined, an­odised al­loy tool comes with two sturdy rub­ber wash­ers and a com­pos­ite and metal spring quick-re­lease clip. Re­move this clip from the hole at the top of the spool holder, slide off one of the rub­ber wash­ers and thread on your cho­sen spools of leader ma­te­rial. Slide the washer back in place. The spools are now held neatly and se­curely on the holder, but are still loose enough to spin freely so you can eas­ily pull off the re­quired amount of leader. Reat­tach the clip and at­tach it to your waist­coat, jacket or bag. At the other end of the holder is an in­te­gral ring with two black an­odised split rings. These can be used to hold other ac­ces­sories or as a dif­fer­ent method of at­tach­ment to your cloth­ing. Pic­tured here in ti­dal blue, it is also avail­able in pine (metal­lic olive). Avail­able from ma­jor re­tail­ers in­clud­ing Glas­gow Angling and Angling Ac­tive.

www.orvis.co.uk Tel: 0333 400 4177

Newspapers in English

Newspapers from UK

© PressReader. All rights reserved.