Contrasting grout adds visual appeal to tiled surfaces
Q. In our kitchen, we applied beautiful handmade Spanish tiles as a framed backsplash behind the stovetop. We were required to use larger grout lines to accommodate the individuality of each tile. The tiles are gray. We are wondering if we should have used matching gray grout instead of white. Thanks for your help.
A. The tiles that you chose make an impressive backsplash; the tile frame adds to its handmade appeal.
The white grout against the gray tiles establishes the grid pattern clearly and also shows the slight irregularities that make the handmade tiles special. You have a palette of white and gray in your kitchen that complements the honey-colored wood cabinets.
You could paint the grout gray, but the tiles will lose some of their individuality and be viewed more as a block of color. If you choose to paint the grout, why not tape over the grout lines with gray tape to see if you like the effect first?
Q. We like the white tiles in our bathroom shower, but we can’t get the grout clean. It looks horrible. We were thinking about putting new grout over the old in a contrasting color, maybe dark blue. Can this be done? A. Mildew, mold and other stains on tile grout are a very common problem. There are cleaning methods that will work, but you may decide to replace the grout. I don’t recommend applying new over old. The new application will be thin and uneven.
Purchase a grout saw, which is a tool that makes removing the old grout simple. Cut along the grout lines; then clear out the grooves with a brush.
There’s a variety of colors in premixed grout, or you can mix a color yourself. The blue grout is a fine choice that you can complement with towels and bath accessories.
Q. I did a painting project years ago in my living room. The flat color was put on the walls and the ceiling; then the walls were measured off into stripes. Alternating stripes were painted over with a clear lacquer. Also, the entire ceiling was lacquered over a faux finish. What do I need to do to cover those shiny, slick, lacquered areas?
A. You bring up important challenges. Creating stripes with paint and/or varnish is a fun decorating project, and the results vary from kid-friendly colors to the classic striped patterns that evoke Victorian wallpapers. Fat stripes applied in pale grays or whites have a contemporary feel, and changing direction to horizontal can make a room feel larger. But what about when it’s time for a change? Whether you have used two or more shades of paint, or created the striped effect using varnish, there will be raised fine lines that separate the stripes. When you wish to switch back to a solid, flat surface, steps must be taken to remove these lines.
Prepare your surfaces for paint by priming your walls and ceiling with a good-quality high-hide primer/sealer that is designed to cover slippery (lacquered) surfaces. That will take care of the glossy varnish on the ceiling and the walls. Let the primer dry completely.
You will now be able to see any areas that need to be repaired and/or sanded smooth. If the ridges between stripes are too pronounced, apply a skim coat of drywall compound. Let the compound dry, sand the surface again and prime over the repairs. You now have a solid, sealed base and can apply your fresh paint. Debbie Travis’ House to Home column is produced by Debbie Travis and Barbara Dingle. Email questions to house2home@ debbietravis.com. Follow Debbie on Twitter at www.twitter.com/debbie_travis, or visit her website, www.debbietravis.com.