VER­TI­CAL MEA­SURE

Boating - - BOAT DOCTOR -

Mea­sure the dis­tance on your kicker be­tween the anti-ven­ti­la­tion plate and up­per in­side edge of the out­board clamp. Sub­tract 2 inches from this length, then add 151/2 inches (ver­ti­cal travel for the model 71091). Cut a wooden stick to this length and tape it so the top is even with the top of the poly mount­ing board. Place the mount­ing flange on the tran­som so that the cen­ter of the stick is 1 inch above the bot­tom of the hull (for power­boat in­stal­la­tion) and mark the lo­ca­tion for the mount­ing flange on the tran­som.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.