STERNDRIVE TRANS­PORT

Boating - - BOAT DOCTOR | WEEKEND WORKBOOK -

If you’re build­ing a stand for a sterndrive (which is heav­ier than an out­board lower unit), con­sider con­struct­ing it at a height that al­lows you to slide it onto the lower unit and then roll the sterndrive away after you re­move the drive’s in­stal­la­tion bolts or other at­tach­ments. You can also use the stand to roll the drive back into po­si­tion for in­stal­la­tion. You might need to tilt the drive up to slide the stand on and off.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.