Stage 2: Front Control Arms

CPP’S Totally Tubular control arm sets are designed to add 5 degrees of caster while providing full wheel travel and minimal friction possible. They are made from thick tubing to eliminate distortion from welding and hard use. The bushings are made from self-lubricating non-squeak patented plastic that will outlast any rubber or urethane.

Each control arm has billet 4140-alloy steel cross shafts and sleeves that are zinc plated for lasting performance. The sleeves have an interlocking design that prevents the hardware from ever working loose. Designed for a simple bolt-in installation with no modification required. They work with all factory and replacement power steering systems, and with or without O.E. bump stops.

They include ball joints specific for 1963-70 or 1971-87 applications. Dualadjustable shocks have separate adjustments for compression and rebound, and their thrust bearings make adjusting spring preload easy. All CPP products have a lifetime warranty.

These new coil-overs will give us an adjustable ride height from standard height to a 3-inch drop. This allows a full 5-1/2-inch drop when combined with CPP’S modular drop spindles. The coilover upgrade kits are available for use with factory control arms, or they can be purchased as a complete kit.

The rear coilover kit offers a full 5-inchs of ride height adjustment (Stock height to a 5-inch drop) and they are specifically designed to work with CPP’S rear C-notch kits.