QUILL I T EASY

Au­tumn Seren­ity

CardMaker - - Contents -

MA­TE­RI­ALS

Card­stock: Michaels (brown); Core’di­na­tions (vanilla cream, egg­plant) Hot Off The Press Seren­ity Pa­per Pack 1/8-inch-wide quilling strips: Paplin’s (cham­pagne pearl, metal­lic crim­son, metal­lic cop­per, deep pur­ple, java, bur­gundy); JJ Quilling (solid gold with holo­foil gold edge, pas­tel green gold metal­lic edged) IMAG­INE Crafts/Tsukineko Bril­liance galaxy gold ink pad Cri­cut dies: El­e­gant Edges, Op­po­sites At­tract Cri­cut Cut­tle­bug Wood­grain em­boss­ing folder Die-cut­ting ma­chine Cri­cut elec­tronic cut­ting ma­chine Slot­ted quilling tool Quilling board Straight pins Self-clos­ing tweez­ers Fine-tooth pa­per crimper Waxed pa­per Fine-tip glue ap­pli­ca­tor or tooth­pick 3M quick-dry glue Tape run­ner Ad­he­sive foam dots

Project notes: Re­fer to project photos and Quilled Shape di­a­grams when form­ing quilled shapes. Use a fine-tip glue ap­pli­ca­tor or tooth­pick to place glue on ends of quilling pa­per when se­cur­ing quilled shapes. Tweez­ers can be used to place quilled shapes onto card.

Quilled Shapes Wheat Stalks

1. Use a 5-inch-long strip of cham­pagne pearl pa­per to roll mod­i­fied Mar­quise. Crease strip at 1 inch from one end; from the op­po­site end, roll to the crease.

Glue at crease; cut length­wise down the cen­ter of 1-inch tail (Photo 1). Cre­ate 12 mod­i­fied Mar­quise shapes. 2. Form a dou­bled strip stem: fold a 14-inch cham­pagne pearl strip in half to make a 7-inch dou­ble strip; glue halves to­gether to within 1/8-inch from open end of strip. Fold back the open ends to form a “V” (Photo 2). 3. Ar­range and ad­here four mod­i­fied Mar­quise shapes to each side of dou­bled strip stem. Ar­range with tails fac­ing up and out. Glue three mod­i­fied Mar­quise shapes on top of dou­bled strip stem.

4. Re­peat steps 1–3 to form three com­plete wheat stalks.

Large Leaf Large Filled Mar­quise

1. Roll a 9-inch-long solid gold with holo­foil gold edge strip into a Mar­quise. Wrap twice with crimped pas­tel green gold metal­lic edged strips.

2. Form a 6-inch metal­lic crim­son V Scroll; form a 5-inch bur­gundy V Scroll; form a 4-inch java V Scroll. Wrap around Mar­quise (Photo 3).

3. Wrap Mar­quise twice with crimped pas­tel green gold metal­lic edged strips. Wrap three times with metal­lic cop­per strips, re­fer­ring again to Photo 3.

Medium Filled Mar­quise

1. Roll a 7-inch-long solid gold with holo­foil gold edge strip into a Mar­quise. Wrap it twice with crimped pas­tel green gold metal­lic edged strips.

2. Form a 5-inch metal­lic crim­son V Scroll; form a 4-inch bur­gundy V Scroll; form a 3-inch java V Scroll. Wrap around Mar­quise. 3. Wrap Mar­quise twice with crimped pas­tel green gold metal­lic edged strips. Wrap three times with metal­lic cop­per strips. Form two to­tal Mar­quises.

Small Filled Mar­quise

1. Roll a 5-inch-long solid gold with holo­foil gold edge strip into a Mar­quise. Wrap it twice with crimped pas­tel green gold metal­lic edged strips.

2. Form a 5-inch metal­lic crim­son V Scroll; form a 4-inch bur­gundy V Scroll. Wrap around Mar­quise.

3. Wrap Mar­quise twice with crimped pas­tel green gold metal­lic edged strips. Wrap three times with metal­lic cop­per strips. Form two to­tal Mar­quises.

Large Leaf As­sem­bly

1. Glue the two medium shapes to ei­ther side of large shape. Glue the two small shapes to the sides of the medium shapes.

2. Roll a metal­lic cop­per Tight Coil large enough to fill the void at the base of the filled Mar­quise clus­ter, leav­ing a tail for leaf stem. Glue to filled Mar­quise clus­ter.

Small Leaves

1. Roll a 9-inch strip of java into a Mar­quise; re­peat with sec­ond strip to cre­ate sec­ond Mar­quise. Sand­wich a 2-inch strip of java be­tween the two Mar­quise shapes; glue to­gether and shape as one Mar­quise (Photo 4).

2. Roll a 6-inch strip of java into a Mar­quise; re­peat with sec­ond strip to cre­ate sec­ond Mar­quise. Glue the shapes to­gether and shape as one Mar­quise. Cre­ate two to­tal Mar­quises.

3. Roll a 3-inch strip of java into a Mar­quise; re­peat with sec­ond strip to cre­ate sec­ond Mar­quise. Glue the shapes to­gether and shape as one Mar­quise. Cre­ate two to­tal Mar­quises.

4. Re­fer­ring to photo, ad­here the dou­ble Mar­quise shapes to­gether to form a small leaf.

5. Re­peat steps 1–3 to form metal­lic cop­per, metal­lic crim­son, deep pur­ple and pas­tel green gold metal­lic edged Small Leaves.

Finishing Touches

1. Form a 3-inch very loose Scroll from bur­gundy quilling strip. Form two 4-inch very loose C Scrolls from bur­gundy quilling strips. Cut length­wise down the cen­ter of each end of strip, but not all the way through the cen­ter of the strips.

2. Form sev­eral 3-inch Tight Coils from quilling strip scraps to use as di­men­sional dots.

Card As­sem­bly

1. Form a 5 x 7-inch card from cream card­stock.

2. Cut a 43/4 x 63/4-inch rec­tan­gle from egg­plant card­stock; ink edges and ad­here to card. Cut a 41/4 x 61/4-inch rec­tan­gle from leaf pat­terned pa­per; ink edges and ad­here to card.

3. Die-cut a 31/4-inch dec­o­ra­tive frame from brown card­stock. Die-cut a 1-inch up­right “thanks you” from bur­gundy small print pat­terned pa­per. Trim “s” from “thanks.” 4. Cut a small panel of cream card­stock to fit be­hind frame. Em­boss frame and cream panel with em­boss­ing folder. Ink edges of frame. Ad­here cream panel and sen­ti­ment inside frame.

5. Ad­here quilled shapes to card, re­fer­ring to photo. Ad­here frame with two Tight Coils un­der­neath for di­men­sion. Trim stems and Scrolls as needed. •

3

4

2

1

Mar­quise Tight Coil V Scroll C Scroll Scroll

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.