When It Rains

CardMaker - - Interactive Cards - De­sign by Robin Arnold


Card­stock: X-Press It (Blend­ing Card);

Stampin’ Up! (pa­cific point) Red dot pat­terned pa­per Clear trans­parency sheet Doodle Pantry Um­brella Ants

dig­i­tal stamp im­age Copic® mark­ers: B00, B12, B14, E25, E27, E29, E49, G28, R22, R24, R29, R59, Y35, Y38, YG11, YG13, YG17 Ivory seam bind­ing Spell­binders™ die templates: A-2 Fancy Weave (#S5-136), Twisted Metal Tags and Ac­cents (#S5-071) Die-cut­ting ma­chine 1/8-inch hole punch Craft knife Ad­he­sive foam dots Pa­per ad­he­sive Com­puter and printer 1.

Print dig­i­tal im­age on white card­stock and trans­parency sheet. Align trans­parency im­age over card­stock im­age and cut both pieces to 31/4 x 41/2 inches.

2. Color card­stock im­age with mark­ers. 3. Form a 41/4 x 51/2-inch top-fold card from blue card­stock.


Be­gin­ning 5/8 inch from left edge, use craft knife to cut a slit along fold of card, stop­ping 5/8 inch from right edge.


Cut a 23/4 x 4-inch win­dow from cen­ter of card front.


Ad­here trans­parency im­age to re­verse side of card front so im­age is cen­tered in­side win­dow.

7. Close card and slip col­ored im­age in­side; align im­ages and ad­here col­ored im­age in place in­side card.


Cut a 31/2 x 5-inch piece from white card­stock. Trim 1/4 inch from each long side, stop­ping 1/4 inch from bot­tom and leav­ing 1/4-inch tabs (Fig. 1). This will be the slid­ing panel.


Place tabbed card­stock piece in­side card with nar­row end slip­ping through slit. Ad­here side and bot­tom edges of card closed leav­ing room for slid­ing panel to move. 10.

Color seam bind­ing with R29 marker. 11.

Punch a 1/8-inch hole through cen­ter top of slid­ing panel. Thread col­ored seam bind­ing through hole and tie a knot; trim ends. Push panel down into card so col­ored im­age is cov­ered.


Use A-2 Fancy Weave die tem­plate to cut a lacy panel from white card­stock; ad­here to card as shown. Ad­here in­side cutout por­tion to a 37/8 x 51/4-inch piece of pat­terned pa­per; ad­here to back of card for area to write mes­sage.


Cut a 33/8 x 45/8-inch rec­tan­gle from pat­terned pa­per; cut a 23/4 x 4-inch open­ing from cen­ter of rec­tan­gle cre­at­ing a frame. Ad­here over lacy panel as shown.


Print sen­ti­ment onto white card­stock. Die-cut and em­boss a label around sen­ti­ment. Die-cut and em­boss a slightly larger label from pat­terned pa­per. Ad­here la­bels to­gether us­ing foam dots. Ad­here la­bels to card as shown. ●

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.