SPELL IT OUT
Frame metal letters to stylishly identify your party space. Choose metal letters that will fit inside your desired frames. Remove the glass and backboard from each frame. Place strips of double-sided tape along the outer edges of each backboard—this will help hold the fabric in place as you adjust the pattern on the front. Measure and cut pieces of plaid fabric to fit the backboards, allowing extra fabric on each edge to wrap around to the back. Once in place, secure the fabric edges with strong adhesive tape. Insert the fabric panels back into the frames and secure with staples. Very slowly, drill a hole through the boards where the hanger on the back of each letter will rest. Insert a flat-bottom screw through each hole, and hang a letter in each frame. Arrange your newly framed letters on the wall over your buffet or dining table.