Endeavour 37
The design of this boat is a great example of the ingenuity and craftiness of the fiberglass boatbuilding industry. Endeavour founders Rob Valdez and John Brooks, both of whom had worked for Vince Lazzara at Gulfstar, got started when Ted Irwin gave them the molds for the Irwin 32. The Endeavour 32 sold well, so in looking for their next model, they found the derelict mold of the Creekmore 34 on the Miami River, cut it in half, added 3 feet and voilà! The Endeavour 37!
And there is a sort of Frankenstein look to the boat. Most were sold as sloops, though a ketch rig was offered. It’s a heavy, slow boat, but comfortable and solidly built, with single-skin hull and plywood interior components (no fiberglass pan). Workmanship is generally quite good. If a previous owner hasn’t switched the gate valves on through-hulls to seacocks, add it to your work list. Ballast is internal. The standard engine was the workhorse Perkins 4-108 diesel.
Two interior plans were offered: the A layout, with convertible dinette forward and two aft cabins, and the B layout, with V-berth forward and a single aft cabin. Having slept in one of them I can say that they are not easy to get in and out of. Better to consider them larger-than-usual quarter berths.
Upwind sailing performance is poor — it doesn’t point well — making you appreciate the strong diesel auxiliary. Motion is comfortable; like the Gulf 32, the D/L and SA/D are motorsailer numbers.
DESIGNER Endeavour Yachts
LOA 37’5” (11.4 m)
LWL 30’ (11.3 m)
BEAM 11’7” (3.5 m)
DRAFT 4’ 7” (1.4 m)
DISPLACEMENT 21,000 lb. (9,513 kg)
BALLAST 8,000 lb. (3,630 kg)
SAIL AREA 580 sq. ft. (54 sq. m)
DISPLACEMENT/LENGTH 341
SAIL AREA/DISPLACEMENT 12.2
YEARS BUILT
PRICE