Installation
To install the new screen frame on your car, begin by lowering the window a bit. Slide the front edge under the rubber seal, then work the back edge of the screen frame under the rubber seal. Slide the screen frame up and under the seal at the top of the window opening. All is good if the frame fits a bit snug under the rubber seal and the bottom edge of the window screen lays flat against the top two inches of the window glass.
If the screen frame bubbles up along its bottom edge, you likely need to trim it slightly so it can be slid a bit further under the window seal. Keep trimming and test fitting until the bottom of the screen frame lays flat on the top edge of the window. Once that is done, you have successfully completed your own set of custom car window screens. Congratulations!
In the event of rain, your car windows can be raised while the screen frames are in place.