VINTAGE SMOKE

1903 AUGSBURG DM 12 DIESEL DIESEL DEMONSTRATOR

If you want to see the first compression ignition engine built by Rudolph Diesel, you have to go to Munich, Germany. If you want to see one of the earliest surviving examples of a production engine built using the Diesel patent, it’s a little closer to homethe Coolspring Power Museum in Coolspring, Pennsylvania.

If you are an old engine nut, the Coolspring Power Museum has plenty to keep your jaw on the floor. As it relates to the earliest diesels, what you will see there is a 1903 German-built DM 12 engine with it’s original 6 KW generator. It was built by VMAMN (Vereinigte Maschinenfabrik Augsburg und Maschinenbaugesellschaft Nurnburg) and it’s the second earliest known engine currently in the United States built under the original Diesel patent. It will soon be the earliest running diesel in the world.

VMAMN was the forerunner of the well known engine maker, MAN (Maschinenfabrik Augsburg Nurnburg), which it became in 1908. Much of the early experimentation by Dr. Diesel was done in the Augsburg, Bavaria, VMAMN facilities. Augsburg was also the first manufacturing home for engines built under the Diesel patent. The VMAMN/MAN production engines of this era are often called “Augsburg” engines and that’s what we’ll call them here.

We won’t recap the entire Dr. Rudolf Diesel saga, but after three prototypes... third time’s a charm... Diesel and his cohorts came up with a winning combination. Late in 1897, VMAMN began tooling up to build engines similar to the most successful engine. The first production engine, a large two-cylinder, 60 hp en

gine, went into service in March of 1898 running a generator at a match factory and it is reported to have been in service more than 14 years. A line of standardized engines, the DM series, appeared in 1901 and in a few years, that line had expanded from 8 PS singles to 800 PS fours. “PS” is for pferdestärke (pferde= horse, stärke= power), a German metric measurement of horsepower 1.4 percent less than our non-metric horsepower but from now on well just use “horsepower.”

Of course we had our Diesel patent engines here too. In 1897, American beer magnate, Adolphus Busch, an ex-pat German, bought a license to be the exclusive North American manufacturer of Diesel engines. Note the capitalization, which is commonly used for engines built when the Diesel patent was in force. Busch established an engineering team, built a factory and soon had a design that was sold under the Busch nameplate. Busch didn’t have the market to himself for long because the Diesel patent expired here in 1912 (1908 in Europe). By then, many more diesels had joined the market, here and abroad.

DM SERIES- FIRST STANDARDIZED PRODUCTION DIESEL

Though Dr. Diesel had sold a fair number of licenses, Augsburg was a few steps farther along the road to marketing Diesel engines because they had been in on the original developments. After selling a number of oneoff Diesels based on the original prototype, Augsburg homogenized all they had learned and began development of a new standardized production engine in November of 1900. They became known as the DM series, “DM” for Diesel Moteren.

The development DM engine, and the first type produced, was the DM 70. It was a single cylinder engine displacing 2500 cubic inches from an 11.81 x 23.62-inch bore and stroke. Power was 70 horsepower at 160 rpm. Significant weight and package size reduction was achieved by eliminating the previous crosshead piston and rod assembly (essentially a two piece connecting rod) and going to the now-familiar trunk piston design (con rod attached directly to piston). The DM Series engines were noteworthy in being one of the first trunk piston Diesels.

By February of 1901, the DM 70 prototype was ready for its first test runs and development

had started on a much smaller engine, the DM 8. You guessed it: It was an 8 horsepower (at 270 rpm) one-lunger with a 6.49 x 10.62-inch bore and stroke, displacing 352 cubic inches. Once both prototypes were running well, the fuel consumption was recorded and the DM 8 used 0.54 gallons per hour at rated power and the DM 70 used 4.79 gallons per hour.

Once they had established the basic architecture, Augsburg began filling out their model lines. We don’t have information on the full range of offered but 1,484 DM series engines of all types were built to the end of production in 1916, including 124 DM 8, 105 DM 12, 81 DM 10 and six of the big 800 horse jobs. The rest were a mixed bag of one, two three and four cylinder configurations. In 1910, MAN developed a number of updated designs but some DM eng ines stayed in production They were redesignated to suit a new nomenclature convention. The DM 12, for example, was redesignated the A1V31 and built to March of 1914.

AIR BLAST DIESELS

When Dr. Diesel translated his theoretical work to a practical design, a mechanical injection system that could overcome 500 psi in a combustion chamber and atomize the fuel was beyond the manufacturing capability of the day. Diesel figured out a way to use compressed air to push fuel through an atomizer and injector nozzle. The end result of air blast injection, finely atomized fuel, was just as good as the early solid injection systems that appeared later, except that the compressed air tended to cool the fuel charge a little more. Diesel had theorized the amount of air pressure needed could go as high as 1,200 psi but in practice, seldom was more than 6-800 needed. At that, it was still challenging the air compressor technology of the day more than a little and that was the air blast engine’s Achilles heel.

The downsides of the air blast system came from the associated equipment. First, an engine-driven high-pressure compressor added a lot of parasitical drag and plumbing complications. Second, there were dangers with high pressure compressed air. At 6-800 psi, air temps in the compressor could get as high as 1,000 degrees and that’s enough to ignite their own lube oil. “Kaboom!” Yeah, it happened! In all cases, an air-to-liquid intercooler was used to cool the air between stages, and the compressors had their own liquid cooling system as

well. Plus, once the engine was warmed up, the operator kept air pressure adjusted as low as possible... just enough to exceed the pressure in the combustion chamber. The DM series engines have absolutely no “diesel knock” when operating properly and when the operator noted a knock, it was his clue to reduce injection air pressure.

To obtain the very high air pressure needed, two-stage compression was used. With engines before 1904, a certain amount of the engine’s cylinder pressure was used to provide the first stage compressed air, boosted by the crankshaft driven single stage compressor. Later engines used only a crankshaft-driven two-stage compressor and this eliminated one of the bigger sources of combustible materials, lube oil and unburned fuel, into the compressor.

The moment machining and metallurgy processes were invented that could make reliable solid injection systems, manufacture of air blast injection diesels sharply declined and they had largely left the manufacturing scene by the end of the 1920s. Some of the later air blast engines transitioned from air blast to solid injection and a remained in service into the 1960s.

HENRY SAVES A PIECE OF DIESEL HISTORY

Upon achieving his monumental success, Henry Ford began collecting significant early technology for a museum and acquired the 1903 DM 12 featured in this story for that collection. The collection grew into what is now known as Greenfield Village, or the Henry Ford Museum. Some of Ford’s original engine collection is still there, including an 1898 crosshead Diesel that is the earliest diesel in the U.S., but isn’t currently on display. DM 12 #185 engine was on display at the Henry Ford for some years but was eventually moved to storage and sold out of the collection in 1985. It had several owners and after being stored at Coolspring for many years, it was donated to the collection in 2018 and plans began to make it a centerpiece of the museum.

HELP PRESERVE DIESEL HISTORY

Because of its rarity and historical significance, the Coolspring Power Museum wants to get the DM 12 running again and set it up in a very special exhibit. An architect has designed a building that resembles a German powerhouse of the early 20th century. The plan is to build on the hill where some of their other special exhibit buildings are, including one that houses the now-famous Snow gas engine. They are fundraising right now to erect the building. Plans are that it will also house some other very early engines, including very early Graz and Benz diesels, thus being a repository for the earliest diesels in the collection and a monument to that early technology. They need your help to do that. There are many ways you can contribute, from outright donations, to the purchase of merchandise and even by buying a brick that will be set into the floor of the new building. Check out the contributions page of their website shown below and see if you can help.

SPECIAL THANKS TO DR. FRIEDRICH W. BUSCH, MIKE MURPHY AND KENNY UPLINGER

According to existing records at MAN, on March 16, 1903, DM 12 engine number 185 left the VMAMN plant at Augsburg, sold to Helgoländer Lift-gessellschaft. It was mated to a 6 KW Siemans & Halske generator, and that marriage has lasted until today. Siemans & Halske was an early iteration of the current Siemans corporation. It was sent to the German island of Heligoland, in the North Sea, where it operated a large elevator to take people and cargo from the harbor area on the Southeast corner of the island, up the bluffs to the main part of town. According to most sources, the engine worked at this until 1928, when Henry Ford acquired it for his growing collection of technological history.

You can’t see it in this shot, but on the other side of the plate is the sales number, 185. The 1903 date is on this side. In reality, this engine might have been built in 1902, as the number and date reflect when it was sold, not when it was built. According to Dr. Friedrich Busch, an expert on early German diesels, the engines weren’t numbered until they were sold, weeks, months or even years after they were built.

The Augsburg DM 12 engine displaces 575 cubic inches and makes 12 horsepower (PS, 11.8 standard) and 252 lbs-ft of torque at 250 rpm from a 7.87 x 11.81-inch bore and stroke. It’s a four-stroke Diesel that operates at a cranking compression of around 500 psi, which is the way compression ratio was discussed back in those days. By all appearances, it’s in good shape inside and out, though it’s missing a few ancillary parts. Museum staff is in the process of acquiring these parts. A full teardown is scheduled to assess condition but the staff see no reason why it won’t be running when it’s enshrined in the new building. Right now it lives next to the gigantic Snow gas engine in a temporary display.

The Susong building is climate controlled and houses the earliest and most rare of the engines on display, some going back well into the 1800s.

Because the DM 12 at Coolspring is so boxed in, with some parts removed for storage, we couldn’t get shots from all sides. Here is a 1906 DM 12 in the Fanziskaner Museum in Villingen, Germany, that shows more of what the installed setup would have looked like. Facing the camera, driven by an eccentric on the crankshaft, is the two-stage compressor. That differs from the Coolspring engine, which was built with a single-stage compressor, though it looks largely the same. To the left, the small tank on the floor is the intercooler, though the plumbing is missing. To the right are the starting and injection air bottles of the original style; the two big ones providing high volume air for starting and the small one a reservoir for injection air. Generally speaking, the operating range is 600 to 850 psi, according to an old DM series operating manual. The generator on the Coolspring engine is driven directly from the crankshaft but many engine operated machinery by belt, which appears to be the way this 1906 engine was used. Pierre Poschadel

For a “simple” early engine, the DM 12 is very complex. The camshaft operated the valves and actuated the injector. There are a large number of controls and adjustments, so a good operator can really dial this engine in for every operating condition. And, no, that isn’t rust but a protective coating of grease.

This is a post card from the early 1900s showing the lift DM 12 #185 powered for 25 years on the island of Heligoland. At that time, the island was a vacation spot. By the time World War II came along, the Nazis had turned it into a fortress with a U-boat base and the island was heavily bombed, including the lift, but not put out of action. In 1947, British forces filled every tunnel and bunker with explosives and blew it up, creating the largest man-made non-nuclear explosion in history. The island’s topography was forever altered but somehow parts of the elevator still remained standing. courtesy Coolspring Power Museum