ADD A FAB­RIC PANEL

Do It Yourself - - Stuff We Love -

BAND ON THE RUN

Fix too-short pan­els by in­set­ting a sec­tion of ac­cent fab­ric for a stripe ef­fect. Sheer fab­ric (A) will al­low light to fil­ter through. Plan the height and place­ment of the band (ours are cen­tered in the top half of the win­dow when hung), then cut across each panel where the band will start. Cut each band the same width as the pan­els, adding a 1/2-inch seam al­lowance to each side. Turn un­der a 1/4-inch hem on each side edge, then turn un­der again and sew. With right sides to­gether, sew the top and bot­tom of each band to panel pieces.

A

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.