Hartford Courant (Sunday)

Control home’s humidity

- By Paul F. P. Pogue Ask Angi

The old saying “it’s not the heat, it’s the humidity” has a lot of truth to it. In recent weeks, many people ranging from Olympians to those living under the heat dome have had to deal with a lot of heat and humidity combined.

Fortunatel­y, humidity is not entirely out of your control. The most comfortabl­e home is one that’s balanced in a variety of elements. Humidity can upset that delicate balance by being too low or too high. A humidity level of about 45% is ideal. You don’t want it higher than 50% or lower than 30%.

Problems caused by humidity

High humidity tends to be a big problem in newer homes. More recently built homes have a tightly sealed interior envelope, which tends to keep the humidity inside. If it causes condensati­on, you’ll get moisture buildup around the house, including behind walls and ceilings. Too much humidity promotes the growth of fungus and mold.

Low humidity, meanwhile, can cause cracks in wood floors and damage electrical equipment. You can develop dry skin and susceptibi­lity to cold and flu germs.

A quick way to check your humidity level is with a hygrometer. You can purchase a basic model for less than $20 at many hardware and big-box stores. Make sure you take readings in different rooms; the humidity will vary around your house.

How to control humidity

If your humidity level is below 25%, consider purchasing a humidifier. Most options cost less than $75 and can effectivel­y boost the humidity in a room.

Fortunatel­y, increasing humidity is a fairly simple process. All you need to do is introduce more moisture into the air, and humidifier­s simply evaporate water and pump it into the air. Indeed, the most low-tech method to increase humidity is placing shallow dishes of water around the house, near vents and sunny windows. As water evaporates, it adds moisture to the air.

Regrettabl­y, dehumidify­ing a house is a more complex operation, since you must mechanical­ly remove moisture from the air and direct it elsewhere.

You do have a number of

DIY options to minimize humidity before you bring machines into the equation, though. For instance, opening windows, leaving doors open throughout the house, increasing ventilatio­n and using exhaust fans will all bring down humidity levels. (Pro tip: Make sure your dryer vent directs air outside and has no leaks. Accidental heat loss from dryer vents is a big cause of humidity!)

If you want to acquire a technologi­cal solution, you can install small roomsized dehumidifi­ers. A unit for a very small room might cost about $50; systems for larger rooms start at around $175. This is a relatively efficient approach, though you’ll have to regularly dump water out of the collection chambers.

For a broad-based permanent solution to excess humidity, consider installing a whole-house dehumidifi­er. This attaches to your home’s HVAC system and removes moisture from the air as it cycles through the returns. These don’t come cheap; expect to pay between $3,000 and $5,000 for a unit. Make sure you hire a licensed HVAC installer who is experience­d with these kinds of systems.

 ?? DREAMSTIME ?? A single-room dehumidifi­er is an ideal tool for removing limited amounts of moisture from the air. You’ll need to regularly dump the water.
DREAMSTIME A single-room dehumidifi­er is an ideal tool for removing limited amounts of moisture from the air. You’ll need to regularly dump the water.

Newspapers in English

Newspapers from United States