Fueling the EV conversion
They’ll turn your gas guzzler into an electric, but be prepared to wait
Mark Wagner isn’t sure what he enjoys more: the looks he gets when he pulls his ancient Volkswagen ragtop into a EV charger parking space, or the looks he gets because of what he does next.
Wagner’s car rolled off of a VW Beetle assembly line in 1962, the year Russian leader Nikita Khrushchev played nuclear brinkmanship with President Kennedy.
But Wagner’s Bug no longer carries an upgraded, Cold War-era 40-horsepower engine and 12.5 gallon fuel tank. They’ve been replaced with a Curtis C-50 Brushless electric motor and part of an 85kwh battery pack scavenged from a Tesla Model S.
“People see a classic car like this pull into a charging space, it’s like, ‘Well, that jerk’s blocking the charger,’ ” said Wagner, 46. “But then I open up the back, pull the charging cord and plug it in, and then it’s like, ‘Wait — that’s electric? Can I see it?’ ”
With gasoline prices at nosebleed levels and concerns about climate change and pollution high, interest in electric vehicles is greater than ever based on Google search trends. But supply chain problems have led to shortages of new EVS, which has pushed up prices for used vehicles, said Mike Spagnola, chief executive of the Specialty Equipment Market Association.
As a result, converting internal combustion engine vehicles to electric “has become more and more popular,” particularly for owners of classic cars, Spagnola said. “It’s a market that will continue to grow in 2022.”
“These are people who love their cars and want to continue driving them, without worrying about the scarcity of parts for these older cars,” Spagnola said. “It’s about prolonging their longevity and, sometimes, it’s about having less of an impact on the environment.”
Skateboarding legend Tony Hawk can probably afford any car on the market, and he already owns a Tesla Model S and a Lucid Air, among others. But one of his favorites is the 1964 Chevy Corvette Stingray, black with a red interior, that he acquired in 2004, he said, after his retirement from skateboard competitions.
“It was the first cool-looking sports car that I saw when I was young, and it reminded me of the Batmobile,” Hawk said. “I told myself that I would buy one when I got older if I could ever afford it.” But lately, driving the car had become more of an exercise in frustration, so Hawk decided to turn the car electric.
“As much as I love the Mopar transmission, it was always a hassle to start and I could never drive it more than 20 miles without worrying about it breaking down,” he said.
Car lovers like Wagner and Hawk are feeding an EV conversion boom, but there aren’t enough companies to meet demand. Waiting lists are sometimes two years long.
For EV West, one of the West Coast’s most popular EV and internal combustion makeover shops, it’s much longer.
“Our shop has a five-year wait list,” said EV West owner Michael Bream, who began his company 13 years ago, inspired in part by — you guessed it — an earlier leap in fuel prices.
“If you called us and you’re like, ‘Hey, Michael. I absolutely want to convert this car.’ We can’t get you in, so we’re going to have to send you to one of our sister shops” that EV West works with on a collaborative basis, Bream said.
On a recent afternoon, Hawk’s car was up on a car lift at EV West’s San Marcos headquarters outside San Diego. That’s also where Wagner’s ’62 Beetle conversion took place at a cost of $32,000.
Bream said a typical conversion starts at around $18,000. Some of the more expensive builds, for high performance, can run well past $30,000.
After the conversion, maintenance becomes primarily a matter of keeping the vintage parts of the car going, which can be handled by the car’s regular mechanic, Bream said.
Turning a car electric is complicated and time consuming; it’s not just dropping in an electric motor and battery and sending the customer on his or her way. Every type of car, truck or van requires its own intricate solution.
Bream has collected a huge amount of parts on site and 3D printers are used to fabricate other parts and for finishing touches that give the feeling that everything belongs. Some analog fuel tank gauges are there, but now the “F” to “E” is reporting how much battery charge remains.
For example, “this Corvette is fiberglass,” Bream said of Hawk’s car. “You don’t want to cut it. You don’t want to alter it. You want to keep it as original as absolutely possible.”
Bream said company engineers and technicians used a bolt-in assembly housing a Tesla Model S motor for part of the installation.
“This way you can also reconvert back to combustion,” he said. “It’s important that we keep the conversions reversible. So we haven’t taken any value out of the car.”
With shortages still affecting most aspects of the supply chain, it might seem likely that there would be spirited competition among conversion companies for the most prized batteries, which are made by Tesla. But there seems to be no shortage of Tesla owners who have gone out and seriously wrecked their cars, while managing to not damage the batteries.
“There’s no competition, because everybody’s really busy,” Bream said. “We’re all on the same page, just trying to build fun, electric cars.”
For his Beetle ragtop, Wagner wanted to mimic the original car as much as possible, and the interior has been carefully upgraded.
“The gas gauge is now the battery monitor. They also gave me these knobs that have a real vintage feel to them,” he said.
The 100-mile range of the car, when driven conservatively, is enough for him to use it as his daily driver, to and from work and for errands. He’s even driven up to
Big Bear from his home in Irvine. One charge gets him to the base of the mountain, where he stops to eat and relax a bit while his car charges for the last 30 miles uphill.
“It’s my forever car,” Wagner said.
Tony Hawk has some pretty specific plans for the first thing he wants to do with his finished Corvette Stingray conversion. Asked where he might drive it first, Hawk said “to and from my halfpipe!”