Hack Google Stadia: Stream gaming onto a Pi
YOU’LL NEED THIS PC OR LAPTOP (Or custom game server) running on the same network as the Raspberry Pi. GAME CONTROLLER Or two.
DESPITE ITS SIZE AND LOW POWER, the Raspberry Pi has proven to be a useful addition to any game-streaming setup. While it won’t run modern games, it can stream them from a PC with Steam or Parsec. All you need is the PC or laptop (or custom game server) running on the same network as the Raspberry Pi, and a game controller or two connected to it.
The same is true with Google Stadia. You might have heard about Google’s game-streaming platform, which pre-launched in November 2019 ahead of full launch in 2020. It enables the streaming of AAA games to your desktop PC computer, potentially with just a subscription. Want to stream games to your TV? You can, using a Google Chromecast Ultra and dedicated wireless game controller (see boxout).
But all of the above can be handled using just a Raspberry Pi. With the basic Stadia tier, you could be streaming a newly purchased video game to your TV through your Raspberry Pi. Yet while setup is straightforward, the results aren’t always perfect. The Raspberry Pi 4 is just about able to deal with streaming Stadia games, but there is some lag. Your mileage may vary on this; it will depend on what games you’re playing as much as the natural limitations of the Raspberry Pi.
The fact that this works at all is amazing. Making Stadia available on as many platforms as possible via apps and the Chrome browser appears to be a key distribution strategy for Google, so there’s a chance that future updates might improve Pi streaming. That said, don’t expect 4K streaming. To improve the chances of everything working, you’ll need a Raspberry Pi 4 4GB, hooked up to your router with an Ethernet cable. –CHRISTIAN CAWLEY
1
PREP YOUR PI
To get anywhere close to lag-free input on Stadia with a Raspberry Pi 4, start with a lightweight distro. For testing we used Raspbian Buster Lite with the Xfce desktop. Start by opening a terminal and updating and installing necessary upgrades.
sudo apt update && sudo apt dist-upgrade
Reboot with:
sudo reboot
When the Pi restarts, install X.Org Server and Xfce: sudo apt install xserver-xorg sudo apt install xfce4 xfce4-terminal
>> Next, be sure to connect the Pi to your router using an Ethernet cable rather than relying on Wi-Fi. To persuade the Raspberry Pi to run at its fastest, you’ll need to overclock it [ Image A]. This has some downsides: While the Pi will run faster, performance will become less reliable. Certain stability issues can occur, such as SD card corruption, or unannounced system crashes.
>> Overclocking the Raspberry Pi 4 is slightly different to older versions. Start by removing the Pi from its case and placing it in a vertical position. If you don’t have a fan attached to the SoC, this is the best way to encourage cooling. A couple of pieces of LEGO can help with this arrangement; you might be able to balance the Pi in one half of the case. With that arranged, it’s time to start stepping up the Pi’s voltage and clock speed. Open config.txt:
sudo nano / boot/config.txt
Find the section labelled “#uncomment to overclock the arm. 700 MHz is the default.” Add the following to step up the speed: over_voltage=2 arm_ freq=1750
Hit Ctrl+X to save and exit, then reboot again. If the Pi boots successfully, return to config.txt and tweak the settings again: over_voltage=6 arm_ freq=2000
>> This should be enough for running Stadia on Chromium. You can overclock to arm_ freq=2147 and add gpu_ freq=750 , but this is pushing the boundaries of stability without a high-end cooling solution.
>> Remember, if the Pi gets stuck in a reboot loop or fails to start correctly, you can fix it by changing config. txt. Revert to arm_ freq=800 and remove the over_ voltage setting, then save, exit, and reboot. Failing that, you’ll need to re-image your SD card.
2
STREAMING WITH CHROMIUM
You are probably aware that Chromium offers the best browsing experience on the Raspberry
Pi. It streams Netflix and other services, and is the only way to access Stadia. This is the same on other platforms, where Google Chrome (based on Chromium) is the only option to play games through Stadia.
>> With the board operating at top speed, it’s time to install or update Chromium: sudo apt install chromium-browser --yes
>> Reboot the Pi, then open the browser and visit https://stadia. google.com. If you don’t already possess a Google account, set one up and then sign up to Stadia, making sure to avoid any unexpected bills when the trial period ends by setting a reminder. If you already have Stadia, sign in.
3
CONFIGURE A GAME CONTROLLER
To play games on Stadia you need a game controller that can be routed via Chromium. The Stadia controllers are the best option here [ Image B], connected via USB-C cable. While they usually connect via Wi-Fi to the remote game server, this won’t sync correctly with browser access on any platform.
>> Other controllers are supported by Stadia, including the Xbox One controller and the PS4 controller. Again, you’ll need to use them in cabled mode rather than over Bluetooth. Some third-party generic USB controllers will also work, but ensure that they have two thumb sticks, D-Pad and triggers. Most USB controllers should plug in and play on the Raspberry Pi. Drivers for popular devices are included in the kernel.
>> When you’re ready, select a game on the Stadia page and click the play button to start. You’ll notice right away that there’s some lag. This is inescapable but is less important with some games. We’ve found that some games perform better than others. So, avoid high-octane thrills like Thumper or Samurai Shodown, in favor of puzzles or strategy titles like Spitlings or slower games FarmingSimulator19 [ Image C]. Curiously, Destiny2 is reported to play well with the Raspberry Pi 4.
4
IMPROVING PI-BASED STADIA
Following Steam Link and Parsec, this is just another way to play PC and console-standard games on the modest Raspberry Pi. While lag is a problem, there’s a feeling that things might improve, making the Raspberry Pi a competent alternative to a Chromecast Ultra as a dedicated Stadia device.
>> So, what can you do to improve performance? One option is to try a different OS. ChromiumOS for the Raspberry Pi is one option, but another is Android. Several Android builds are available for the Raspberry Pi 4, although Konstakang’s LineageOS 16 (based on Android 9) is considered by the developer to be currently unsuitable for media or gaming at this stage. It does, however, offer a tempting option for future Android use on the Pi 4.
>> As with many Pi projects, your mileage may vary. At worst, you’ll get a buzz of satisfaction from accessing Stadia on your Raspberry Pi; at best, you can run a virtual farm.