Build brick wall with mortar that lasts
and clay is a natural material that has infinite color variability. The clay deposit the home’s original brick came from could have been exhausted decades ago. The kiln temperature for the new brick could have varied, meaning that even if it were the same clay, the color of the finished brick could have come out different.
My advice to those who are building a new home of brick is to think about a future room addition and buy the brick for it at the same time you build. I know this sounds like a harebrained idea, but you’ll never regret doing it. Brick is easy to store and it won’t deteriorate if you just put a cover on top of it.
Here’s what Paul taught me about mortar. The mortar of old that was used on just about every project in the 1800s and early 1900s here in the U.S. was made with just hydrated lime and sand. Modern mortars tend to have a Portland cement component and not so much hydrated lime.
Hydrated lime is an amazing material. As crazy as this sounds, it’s powdered limestone. You know how durable that is, right? Think of all the national monuments and government buildings made from blocks of limestone. When you add water to hydrated lime, it reforms into limestone.
Just a month ago I was in Puerto Rico and had the good fortune to visit a large church that was being restored. I talked with the masonry foreman for a short time, asking him about what they were using for both the brick and stucco restoration.
His answer was simple: “We just use hydrated lime. It can last for centuries, especially here in Puerto Rico where we don’t get freezing weather.” He did say the stucco on the front of the church did have some white Portland cement added to it to make it more durable for people touching the walls.
Matching mortar takes lots of patience. It’s important to realize that you need to match the sand in the old mortar when you’re repairing mortar or trying to match up mortar for a room addition.
Not all sand is the same.
Look very closely at a weathered mortar and you’ll see that not only are the grains of sand different sizes, but they’re also often different colors. Remember: Sand is nothing more than very tiny pieces of rock. Sand is to ants what boulders are to us!
You need to visit several nearby gravel pits that sell sand to try to locate sand that matches what’s in your current mortar. This requires diligence, determination and discipline. It will be rewarded if you find the correct sand. Use a 10X magnifier to really get a feel for what your sand looks like before you go. If you have a smartphone, snap a close-up shot of your mortar so you can see the colors and relative sizes of the grains of sand.
It would be very wise for you to take your time and do a small test panel before you install the brick on the addition. Lay up a tiny brick wall that’s maybe a foot tall by two feet long. Allow the mortar to cure. Remember that the sand particles are going to be covered with the lime paste so the mortar will dry with a uniform color and look nothing like your 100-year-old mortar.
This paste wore off your existing home’s mortar decades ago, which is why you can see the individual grains of sand now. After a month, do a very light acid wash on the test panel to dissolve the lime paste on the sand. You should be happy with the results if you invested the time to get the right sand.