Lots of 3D Print­ing

RC Car Action - - PROJECT -

3D-print­ing tech­nol­ogy is re­ally tak­ing off in the RC hobby, and more builders and hob­by­ists are uti­liz­ing it to build some amaz­ing ve­hi­cles. For this project, the 3D printer at Tekin worked hard to make more than 175 in­di­vid­ual parts from roughly 1,282 feet of 1.75mm ABS fil­a­ment. Many of them went through mul­ti­ple re­vi­sions un­til we were sat­is­fied with the de­sign, so the ac­tual amount of fil­a­ment us­age ended up be­ing a lit­tle bit higher. Nearly 3 pounds of ABS fil­a­ment was used.

No off-the-shelf body here!

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.