Materials Needed
Important Note: Use dimensions provided here as approximations. Measure as you go with materials you have at hand and modify as necessary.
TO CRAFT THE BASIC OUTLINE FOR A BOX:
• 2 pieces of half-inch thick plywood 22 inches wide by 40.75 inches high for the sides
• 1 piece of half-inch thick plywood 48 inches wide by 40.75 inches high for the back
• 2 pieces of half-inch thick plywood 48x24 inches for the top and bottom
IN THE BASIC SHELL:
• 2x2 lumber in total length of approximately 34 feet cut into 12 pieces (five pieces 40.75 inches long; three 43.5 inches long; four 17.5 inches long)
• Shelving with 0.75-inch thick wood slats with a width between 3 and 5 inches
• Pegboard of 14x19.25 inches screwed to the left-hand side of the box via two 0.75x0.75-inch wood strips
• 2 cabinet door handles
• 4 hinges
• L-shaped corner braces for shelving (six 4-inch braces; three 2-inch braces)
• Nails and screws (approximately 3 to 4 dozen of each)
• Woodworking glue
• Rubber stopper (1.5-inch diameter)
• Enamel paint (for interior) and flat paint (for exterior)
• Optional overhead lamp