SKI

How to spot a bad tune, a.k.a., sometimes it really is the skis.

IS YOUR SKI SHOP DOING RIGHT BY YOUR SKIS? HERE’S HOW TO TELL A GOOD TUNE FROM A MEDIOCRE ONE.

- By Jenny Wiegand

We all have days on the slopes when we just don’t feel on top of our skis. Often, it’s us—we might be rusty, tired, or sore. But sometimes, it’s not us. They say only a bad craftsman blames his tools, but good skiers could be justified in blaming their skis if a bad tune is at the root of a bad ski day. Leif Sunde, owner of the Denver Sports Lab, will be the first to admit that ski technician­s don’t always get it right. “Not all ski tuning shops are equal. There have been tremendous advancemen­ts in tuning technology over time, but it all comes down to how it’s used and attention to detail,” he explains. So how can you tell if your ski shop is doing right by your skis? Sunde recommends running through this post-ski-service checklist to ensure a bad tune isn’t to blame for bad turns.

BASES

FLATNESS // A full-service tune should include a stone-grind to make sure bases are flat. A flat base is key to ensuring all other tuning work is consistent—if the ski is not flat, edge bevels will be incorrect and base structure may not be consistent. Check the flatness of your base after a tune with a level or true bar.

WAX // Does the base look ashy or chalky? If so, skis were not properly waxed. They might stick to the snow at first if bases weren’t brushed or buffed after waxing; if stickiness persists, wax wasn’t applied properly.

STRUCTURE // Ski bases should have a discernibl­e structure, which helps them shed water and glide on snow. This structure should be clearly visible and consistent from edge to edge. If structure is not visible or if structure isn’t consistent, bases may not be flat and may be in need of a stone grind.

EDGES

SIDEWALL // Was sidewall pulled before edges were sharpened? If not, edge bevels are likely incorrect and will lack effectiven­ess despite feeling sharp. You can tell if sidewall was pulled based on the color and cleanlines­s of the sidewall closest to the edge—if this area is clean and the color is more vivid, sidewall has been stripped.

BEVEL // Most recreation­al skis come with a 2-degree factory bevel, so the ski shop should match this bevel when sharpening your ski’s side edges. If edges feel too aggressive on snow, they may have been over-beveled. If the edges feel too sharp, the bases are concave and weren’t ground to flat before the edges were sharpened. If edges feel nonexisten­t on snow, edges were under-beveled or the base may be convex instead of flat.

 ??  ??
 ??  ?? LEIF SUNDE
Owner, Denver Sports Lab,
Golden, Colo.
Sunde is a profession­al ski technician who founded the Denver Sports Lab to make Olympic-level tunes available to the public.
LEIF SUNDE Owner, Denver Sports Lab, Golden, Colo. Sunde is a profession­al ski technician who founded the Denver Sports Lab to make Olympic-level tunes available to the public.

Newspapers in English

Newspapers from USA