Firm blames weld in Keystone spill
TOPEKA, Kan. – A faulty weld at a bend in an oil pipeline contributed to a spill that dumped nearly 13,000 bathtubs’ worth of crude oil into a northeastern Kansas creek, the pipeline’s operator said Thursday, estimating the cost of cleaning it up at $480 million.
Canadian-based TC Energy said the flawed weld caused a crack that then grew over time because of the stress on the bend in its Keystone pipeline system in rural pastureland in Washington County, about 150 miles northwest of Kansas City. The company said the weld was for a fitting that connected two sections of pipe, and the fitting and weld came from a manufacturing plant.
The company, which is responsible for overseeing inspections of its pipeline system, said it still is investigating the cause of the pipeline stress and is analyzing “other areas with potentially similar conditions.” The Dec. 7 rupture spilled nearly 13,000 barrels of crude oil, with each barrel containing 42 gallons, the size of a standard bathtub.
“Our focus continues to be the safe operation of the pipeline system,” the company said in a statement.
No one was evacuated following the spill, and officials said it did not affect the two larger rivers and reservoir
downstream. With federal regulators’ permission, the company reopened the affected segment a little more than three weeks after the spill, though at a lower pressure than before.
But Bill Caram, executive director of the advocacy group Pipeline Safety Trust, said it’s “troubling” that TC Energy said the flawed weld came from a “fabrication facility.” He said conditions there should have been ideal for making a weld that would not fail – as opposed to welding in the field.
“It begs the question of how many other bad welds are on the Keystone pipeline from this same fabrication facility,” Caram said.
Caram also said pipeline companies and pipeline regulators in the U.S. Department of Transportation struggle to deal with a combination of multiple threats that on their own don’t appear to need immediate attention but together add up.
The spill was the largest onshore in nine years and larger than 22 previous spills on the Keystone system combined, according to U.S. Department of Transportation data. That’s even though the company decreased its estimate for its size from its initial figure of 14,000 barrels.
Zack Pistora, who lobbies the Kansas Legislature for the Sierra Club, argued that the company’s explanation shows the pipeline’s design was flawed. In July 2021, a U.S. Government Accountability Office report said the four biggest previous spills on the Keystone system were caused by issues tied to its original design, its construction or the manufacturing of the pipe.
The company’s statement Thursday said an analysis of the pipeline’s metal showed no issues with it or its strength.
The Kansas House energy committee plans to have hearings on the oil spill in March, according to its chair, state Rep. Leo Delperdang, a Wichita Republican whose career includes a stint with a pipeline company.