The Family Handyman - - HANDY HINTS - VERN HAUSER

Here’s a quick way to set the height of a ta­ble saw blade. I cut notches on the end of a 4x4 block at the blade heights I use most of­ten: 1/4 in., 3/8 in., 1/2 in. and 3/4 in. To use the block, po­si­tion the de­sired notch over the blade and raise the blade un­til its high­est point just touches the block.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.