Make room for the com­po­nents

The Family Handyman - - BEST PRO TIPS -

Lay out the com­po­nents on the front ( D) and back ( E) pan­els, mark their cen­ters and drill the ap­pro­pri­ate-sized holes fol­low­ing the kit in­struc­tions ( Photo 8). Some of the com­po­nents re­quire ma­te­rial from the back of the pan­els to be re­moved in or­der to fit. Use a Forstner bit to re­move enough ma­te­rial from the back (with­out go­ing through) to al­low the com­po­nents to be fas­tened with a nut on the front side of the panel.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.