Fi­nal as­sem­bly

The Family Handyman - - BEST PRO TIPS -

In­stall the com­po­nents on the front and back pan­els and sol­der the wires to the ter­mi­nals ac­cord­ing to the in­struc­tions in your kit ( Photo

10). Use hot glue to fas­ten the amp board to the in­side of the box, then plug all the com­po­nents into the board. Feed all the wires into the box and screw the rear panel to the cleats, be­ing sure to use pi­lot holes. Ap­ply glue to the cleats and set the front panel into the box while feed­ing the rest of the wires through ( Photo 11).

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.