Say bonjour to extra storage . . . and style!
Hang anything from purses to jackets on this chic rack made with vintage-inspired napkins and knobs!
1 Paint the wood plaque white; sand lightly when dry. If you’re using printed paper napkins, remove the top layer and use it only. Cut the napkin or tissue paper to cover about half of the board, choosing the parts of the pattern you want to show. It’s all right to use several pieces if your pattern will look better that way. Paint Mod Podge on the part of the board you’re covering, smooth the napkin on top, pressing it into the contours along the sides and tucking the ends underneath. Immediately paint another coat of Mod Podge over it. Repeat until the plaque is completely covered; let dry.
2 Find and mark the center of your board. Measure and mark 4 1/2" in each direction, then 4 1/2" more on each side.
3 Drill or screw in a drywall screw to make a hole through the board at each mark.
4 Push the screws that came with the knobs through the board and screw on the knobs. Add hanging hardware to the back.