EASY STEPS TO CABINET SHELF

Gather your supplies

• 1200 x 600 x 18mm pine panel

• Timber stain

You’ll also need Tape measure; saw; drill; PVA glue; timber screws; timber filler; pu y knife; sandpaper; paintbrush; lint-free cloth

Here’s how

STEP 1 Measure your cabinet to determine size of shelf. Cut shelf top and sides from timber. Predrill 2 holes at ends of top.

STEP 2 Apply glue to one edge of sides and bu against shelf top.

STEP 3 Screw through top into sides to secure.

STEP 4 Apply timber filler to screw holes with a pu knife, let dry, then sand smooth. Clean dust.

STEP 5 Use a paintbrush to apply stain to entire shelf, then rub back with a cloth. Apply another coat if desired. Leave to dry. y

STEP 3

Embrace DIY and prep for entertaining with this easy project

Add a touch of country charm to your kitchen and keep your fave tipple close at hand by knocking up a rustic wine rack. Ideal for a DIY novice, the simple design uses recycled timber, which is super easy to source – just grab an old pallet. You can usually find one for free on trading websites such as Gumtree, so you’ll have lots of free material for practice. Give it a crack!

Gather your supplies

• Recycled timber pallet

• Charcoal timber stain

You’ll also need Demolition bar; hammer; mitre saw; drill; countersinking drill bit; PVA glue; 50mm countersunk wood screws; pencil; tape measure; clamps; square; handsaw; chisel; sander; painting gear; 20mm nails

Here’s how STEP 1

STEP 2

STEP 4

STEP 6