> Step by step
2. Getting started with Dune 3’s Wavetable Editor
1 Dune 3 improves on the wavetable features of Dune 2 with the addition of the Wavetable Editor. Select Initialize Patch from the Patch menu, then switch the one active osc from VA to Wavetable ( WT) mode. The default three-waveform table is loaded – sweep through it with the Position knob, and adjust interpolation smoothness with the Interpol knob.
2 There are 47 wavetables onboard. Load MH Phase Dist 3 from the Wavetable menu, and then click the Edit button to open the Wavetable Editor. Here, you will see the 16 waveforms of the wavetable arranged in a row at the bottom, and the currently selected waveform in the main window above.
3 Let’s start by editing one of the existing waveforms. Select waveform 16, then click the blank menu at the bottom right. This holds a variety of preset waveshapes generated using the Formula Editor – select Bell 1 to load that wave. Now we can edit it using the middle three of the five tools at the top left, zooming in and out if required.
4 The Pen tool is used to edit the waveshape directly – simply drag in the main display to shape the curve. The Line tool creates a straight line from the start to the end of each drag. And the Segment tool lets you create a series of contiguous lines by clicking nodes in and dragging them around, then turn them into curves by dragging on them.
5 Clicking the right-most tool button opens the Additive Editor, where the individual partials making up the waveform can be tweaked – handy for making organ-type sounds. The top series of vertical bars control the amplitude of each partial, while the bottom bars adjust the phase. Select any other tool to exit the Additive Editor.
6 The top left Menu houses a range of waveform-transforming operations including Invert, Reverse and Normalize. Here, you can also import WAV files, as single waveforms or complete wavetables – let’s try the former. Select Wavetable 1 in the bottom row, then Import WAV (Single-Cycle) from the Menu, and load in a short sample of your choice.
7 The sample is squeezed down to a tiny 2048 samples in length and added to the wavetable. Now we have our edited waveform at the end of the ’table and our imported wave at the start. Wouldn’t it be great if we could automatically fill all the slots in between with a smooth transition from slot 1 to slot 16?
8 Select Morph Wavetable from the menu to do exactly that. The result is a 16-slot wavetable that interpolates nicely from our imported WAV to the edited shape we made earlier. To make the transition even more detailed, increase the number of slots (up to a maximum of 256), drag the last waveform slot to the end of the row and Morph again.