Make an… aperture card
Step 1
WORK all the cross stitch in two strands of stranded cotton, with one strand for the backstitch and French knots.
Step 2
TRIM the stitched fabric to fit your card, with the design centrally placed behind the card’s aperture.
Step 3
ATTACH double-sided tape to the inside of the card around the edge of the aperture.
Step 4
PLACE the stitching on the table right-side up, and then place the card on top, pressing down firmly on the tape.
Step 5
CHECK which flap will fold onto the back of the stitching, then add strips of double-sided tape and press firmly down to secure.
Take care not to carry black thread across the back when stitching the greetings in case it shows through