TOPEAK SHUT­TLE GAUGE DIG­I­TAL IN­DE­PEN­DENCE

£49.99 › Pre­ci­sion pres­sure

Cycling Plus - - FIRST RIDE -

1 CON­STRUC­TION

Topeak’s Shut­tle Gauge Dig­i­tal has a tough plas­tic and alu­minium body in­cor­po­rat­ing an LCD screen, plus steel and al­loy ttings with rub­ber dust cap. It’s palm-sized and weighs 107g.

2 US­AGE

De­signed to give ac­cu­rate pres­sure read­ings for all tyres, sus­pen­sion forks and shocks up to 300psi/20.7 bar via a clear, ro­tat­ing screen that also shows kg/cm 2 and power level of the in­cluded CR3032 bat­tery.

3 COM­PAT­I­BIL­ITY

The tyre valve side of the gauge has re­versible in­ter­nals to t Presta, Schrader or Dun­lop valves, while the pump head side has a Schrader or SmartHead adap­tor, which un­screws to un­cover a Presta valve head, mak­ing it com­pat­i­ble with ev­ery standard tting.

4

For mo­bile pres­sure check­ing, se­lect the rel­e­vant tyre valve adap­tor, push the gauge on, then turn the al­loy lever to fully en­gage. If the gauge isn’t al­ready switched on, it will au­to­mat­i­cally start if the pres­sure present ex­ceeds 5psi/0.34 bar.

5 PUMPED

Us­ing the Shut­tle Gauge with a pump re­quires the same process, plus tting your pump to the rel­e­vant pump head adap­tor. Se­lect your pre­ferred pres­sure unit with the on switch be­neath the screen, and use the air re­lease but­ton on the op­po­site side to

ne tune pres­sure.

Use solo or with a pump for in­stantly ac­cu­rate pres­sure read­ings

Newspapers in English

Newspapers from Australia

© PressReader. All rights reserved.