MK2 FOCUS ST

SCC PERFORMANCE

Much like with the Mk1 RS, Robert Oldman’s recommendations for the Mk2 ST at this price point centre around building upon the alreadystrong stock base to futureproof for further modifications. With a budget of £1,000, you can start with a Milltek cat-back exhaust system at £568.20, and augment it with a Revo Stage 1 remap, which will help to optimise performance and iron out those imperfections for a very reasonable £358.80. With budget rising over a grand, Robert’s recommendation is to go with the upgrades outlined at the previous price point, then add a downpipe and decat with locking bolts for £420, a RamAir intake at £169.99, and an AIRTEC intercooler for £299. With all of this in place, the step up from the existing Revo Stage 1 to Stage 2 is a no-brainer at £60 which will optimize the effects of your new upgrades, taking you comfortably above 300bhp. Building on the base of everything suggested in the previous two budget categories, the next step Robert suggests is suspension – specifically the KW V3 at £1,470. Brakes are next, with K-Sport’s front setup with Ferodo DS2500 pads coming in at £1,200; SCC rear discs and Ferodo pads to match fronts are £320. Goodridge braided lines are £75. And then it starts to get very serious: a block mod (£799), RS clutch (£950), Powerflex full bush kit (£470), Whiteline anti-lift bushes (£177), Forge actuator and recirc (£300), and a Revo torque mount (£120). “This makes a solid 300-320bhp that handles and stops!” he says.

DEMON PERFORMANCE

The advice for the Mk2 at this entry-level point is to go with Revo’s Stage 1 software, which Demon Performance can install for you for an all-in cost of £358.80. The ones-and-zeroes are designed to increase power and torque smoothly across the rev range while maintaining factory safety mechanisms, and Pete tells us that the Stage 1 upgrade will increase power from 225bhp to 266bhp when running on high-octane fuel like Shell V-Power. Pete agrees with SCC that the step up to Revo Stage 2 is the way to go at this point. Revo’s own quoted power figures for this upgrade are ‘between 270-310bhp’ which is a broad spread of numbers, but naturally this is dependant on fuel as well as hardware upgrade choices. At this level, it’s required that you upgrade the intercooler, intake and exhaust, and Demon are happy to talk you through all your options here! In fact, if you step over to the next price bracket up, you’ll find a package they’ve put together for you… Here, Demon are proving that you don’t need to spend outrageous sums of money to turn a Mk2 ST225 into a fairly savage road weapon. Pete and his team can offer you an all-in package comprising Revo Stage 2 software, KMS Section 18 turbo-back exhaust system with decat pipe, Forge DV, K&N 57i induction kit, Auto Specialists plenum, and AIRTEC front-mount intercooler. The cost of all this? A very reasonable £2341.99 fully fitted, well under our £5k threshold here, which will give your Focus 306bhp with total reliability.

AUTO SPECIALISTS

“As the Focus ST is so well catered for, you can get a lot for your money even at this level,” says Alan Shepard of Auto Specialists – who sell the AIRTEC range, which is produced in-house. “It’s all about getting the car to breathe better with less restrictions both in and out, so we’d recommend our AIRTEC Group A air filter with cold feed scoop (£159), along with our AIRTEC Stage 2 Gen3 intercooler upgrade (£299.95). Coupled with one of larger AIRTEC downpipe and de-cat packages (£259) and our Stage 1 remap (£250) to see the very best of all the new additions, you can see big gains that will transform the way the car drives and for less than £1,000.” “Upping the budget will see further tuning potential unlocked at this level,” says Alan. “We’d suggest retaining the Group A air filter kit (£159) but upgrading to our larger and more capable Stage 3 intercooler kit (£299.95). To go with it, we would recommend our AIRTEC 2.5in hard pipe upgrade (£330), which sees guaranteed power gains. The AIRTEC downpipe and de-cat package (£259) would remain but coupled to a Mongoose exhaust system (£527.99), and we would go with a Revo Stage 2 map (£418.80). This would see good gains but you’re on the limit of some parts here, so we would always recommend stretching to include an upgraded AIRTEC plenum, block mod and RS clutch kit conversion to ensure further gains reliably.” Starting with a generous budget, Alan recommends futureproofing the build from the off. “We’d start with a forged engine build, so the internals are upgraded with forged pistons and steel conrods - and we’d do a block mod for strength (£2,250). An AIRTEC Stage 4 intercooler kit (£649) and upgraded plenum (£345) would be added to the previous budget’s modifications, with an AIRTEC hybrid turbo (£1,250). On top of that would be an RS clutch kit (£550), and we’d strongly recommend KW coilovers (£1,470) and a Revo big brake kit (£2,370) to help harness the power, which is costly but necessary. That would put the building blocks firmly in place to build the ultimate ST when you decide to stretch for more power.”