Panasonic Toughbook A3
Panasonic’s most rugged Android tablet yet doesn’t disappoint.
Field workers often find themselves in harsh environments where a standard consumer grade tablet just wouldn’t be able to withstand the cold, heat, rain or other conditions they encounter which is why they turn to rugged tablets such as Panasonic’s new Toughbook A3.
The company’s latest rugged tablet is the successor to its Toughbook A2 that launched back in 2016 and a number of upgrades have been made to the device that make it an even better fit for those in working in industries such as the military, construction, government, law enforcement, healthcare and enterprise.
We’ve spent the last few weeks trying out the Toughbook A3 and getting a feel for how first responders and other mobile workers could benefit from Panasonic’s most rugged Android tablet yet. In this review, we’ll take a closer look at the hardware, software and experience of using this rugged tablet.
The company’s latest rugged tablet is the successor to its Toughbook A2 that launched back in 2016.
Design
As Panasonic’s latest rugged tablet bears the Toughbook name, it shares the same silver and black color scheme found on many of the company’s rugged laptops. Although the device weighs 1.98lbs it doesn’t feel overly heavy and Panasonic did manage to shave off .2lbs when compared to its predecessor the Toughbook A2. The tablet is a little bit more than half an inch thick at 1.65cm and the device feels very sturdy with no bending or give whatsoever.
The 10.1-inch screen takes up most of the front of the device and is protected by a metallic bezel that wraps all the way around which also houses a 5MP frontfacing camera, microphone and ambient light sensor. A hard plastic shell protects the edges of the Toughbook A3 from drops and here you’ll find a total of eight physical buttons with five of these being completely user customisable along with a volume up, volume down and power button.
On the left side of the device there is a 16v DC In charging port along with a full USB 2.0 Type-A port and a USB 3.0 Type-C port. On the right side of the Toughbook A3 you’ll find an audio jack, security lock and a slot to hold the included stylus. The bottom of the device contains a Cradle I/F connector along with optional dual pass through connectors.
If you flip the Toughbook A3 over, you’ll find two hot swappable 3,200mAh batteries that are locked in place with two slidable tabs. Underneath each battery there is a nano SIM slot and the tablet can be outfitted with two SIM cards.
Panasonic’s xPak expansion area can be found at the top of
the backside of the device and while our review unit came with a barcode reader, businesses can also choose to outfit their workers’ Toughbook A3’s with a smartcard reader or even an additional USB Type-A port.
Hardware
As a fully rugged device, the Toughbook A3 has an IP65 rating which means the device is water and dust resistant but not waterproof. It is also certified to the latest MIL-STD-810G standard and can withstand six-foot drops. Panasonic has even tumble tested the A3 by putting it through 500 tumbles from 3.3ft at a rate of 5rpm.
The device’s 10.1inch WXGA display runs at around 500 nits of brightness indoors but is capable of going all the way up to 800 nits so that it can be easily used outdoors in direct sunlight. Panasonic has also given the display an anti-reflective screen treatment for improved outdoor visibility. The 10-point capacitive touchscreen can be used with gloves and the display is even able to distinguish between finger touches and rain.
The Toughbook A3 is powered by Qulacomm’s SDM660 octa-core CPU clocked at 2.2GHz and by 4GB of LPDDR4 RAM.
There is 64GB of eMMC storage built into the device but this can be boosted by up to 64 GB with a microSD card.
Battery life is one of the A3’s biggest strengths and the tablet lasts for up to 9 hours with the two standard 3,200mAh batteries. However, Panasonic also offers dual extended life 5,580mAh batteries that allow the device to run for up to 15.5 hours on a single charge. The included DC charger is fairly slim and can fully charge both batteries in 4 hours but you can also use the USB Type-C port for charging if the input source is 100mA or higher. For organisations with multiple Toughbook A3 tablets, Panasonic sells a 5-bay battery charger and additional standard and extended batteries are also available for purchase.
Software and support
The Toughbook A3 ships with Android 9.0 and Panasonic’s bundled apps which include a note taking app, a file copy utility, a whitelisting/ blacklisting app, a hardware diagnostic app, a rapid configuration app for enterprise deployment and a barcode reader app.
Of the preinstalled apps, we were quite impressed with the User Button Manager app which allows for the physical buttons on the left and right side of the device as well as buttons A1-A3 to be assigned to perform various functions or open apps. Multiple apps or functions can also be assigned to each button depending on whether a user short presses or long presses it and users can also assign actions to two buttons at once.
The Toughbook A3 may only have 4GB of ram and be powered by a Qualcomm chip from 2017 but during our time with the device, it performed quite well and was able to boot up from a powered off state in just over twenty seconds. Apps opened quickly and there were never any crashes or hang ups during our testing. The A3 also received several security updates while in our possession.
The Panasonic Toughbook A3 is well-suited for tough jobs in less than ideal conditions thanks to its IP65 and MIL-STD810G certifications. The tablet features an 800 nit display with anti-reflective coating for outdoor use and the device can easily be customised to meet the needs of both field workers and first responders.
Anthony Spadafora