GADGETS YOU CAN’T DO WITHOUT!
Whether for work or play, in the home, or on the road, we've got a gadget for you!
There are few things more galling than seeing a pair of stereo speakers huddled together on a bookshelf, surrounded by trinkets and electronics, looking under appreciated and having their talents go to waste.
While we’d hope that nobody reading this feature is quite in that situation, it isn’t always obvious what you should do in order to get the best possible sound from your speakers – no matter whether they’re brand new or you’ve had them for a while.
It’s a lot to do with experimentation, and all speaker manufacturers will have suggestions to guide you with their own designs. But there are some simple steps that will set you on the right path to audio enlightenment.
While we can’t hold your hand through the set up and positioning of your specific speakers in your specific surroundings, if you’re ignoring any of these fundamentals then you’re sure to struggle.
Let your new speakers run in for a while
It’s important for speakers to be properly run in before you judge them, so don’t subject them to an extended testing session as soon as you’ve lifted them from their box and linked them to the rest of your system.
All this really means is you leave them playing, allowing the components to warm up, stretch out and get into their stride. Some speakers can take almost 100 hours to come on song – and they can keep improving after that – though for most, around 24 hours should suffice.
It’s unlikely you’d want to do this at any extreme volume anyway, but be careful not to push them too hard straight away. Let them ease into a walk before you ask them to run.
Get the positioning right
If we accept that you’re not really doing anything but plugging them in and waiting during task one, the most time you’ll spend getting your system to sound right will be concerning your speakers’ positioning.
Take your time here. Small differences in position can make big differences to the sonic balance. Placing your speakers close to the back wall will give you more bass, while putting them further away will decrease the low end you hear but should also offer more convincing stereo imaging.
This should be a balance, rather than a compromise, though rear-ported speakers – that is to say those that have a reflex port firing backwards – tend to be more sensitive to proximity to a rear wall.
Try to avoid placing your speakers in a corner. It may be convenient spatially, but you’ll almost certainly get fat, lumpy bass that will skew the whole balance of the sound.
Imaging is also largely affected by the angle of the speakers. Most speakers sound best toed-in towards your most regular listening position, which should also be equidistant to each speaker for peak sound dispersion.
Some manufacturers design their products to fire straight ahead, so it’s best to check the manual for information and suggestions on that. The manual may also suggest how far apart to space your speakers and the recommended distance from each surrounding wall. Ultimately, though, it is up to you to adjust and tweak to get the best out of your room.
Invest in stands, spikes and speaker cable
You might have bought something advertised as ‘bookshelf’ but, as with their surrounding environment, the support on which your speakers sit is of vital importance. We suggest you buy some quality stands.
The performance of a standmount speaker depends hugely on the quality of its support, and this is another area where you shouldn’t compromise. There are companies dedicated to designing Awardwinning stands and hi-fi support, but speaker manufacturers sometimes also create supports tailored to their specific ranges, so it’s worth also spending time to research and listen to an array of options.