CHALKED PAINT DELIVERS CLASSIC DISTRESSED LOOKS
It's easy to apply and sand, has no odours and has colours that take you way back
Want to create an attractive distressed finish on furniture and interior woodwork? Chalked paint is one of the most effective specialty finishes you can apply to create this effect, in part because it's colour pallet takes you back at least a century.
And there's more.
As you'd guess from the name, chalked paint is soft when it dries and it sands very easily. It can be applied to clean, bare wood, though I have also applied chalked paint to wood that has been lightly oiled, and even over deteriorating stained finishes. The main virtues of chalked paint is that it has no harsh odours, it's easy to apply well, and it's tailor-made for the kind of distressed look that has become so popular. Chalk-type paints are made by a handful of different companies, but the most widely available in Canada is made by Rust-Oleum.
To create the distressed look, begin by staining your wood to simulate the golden patina imparted by age. This is what you'll see later in areas where your simulated wear goes right through the chalked paint. Any medium brown stain will do — even oil-based. Let this stain dry for more than a day, then stir the chalked paint thoroughly before brushing some on. Chalked paint is thicker than many kinds of paint, so it takes a thorough mixing. I use an old 1 1/2” diameter spade bit in a cordless drill as a kind of workshop egg beater to mix all kinds of paint perfectly. It's much more thorough than mixing with a stick by hand.
Apply paint and let it dry on top of the stained wood. One coat usually does it, but two coats may be necessary if you're not happy with the coverage. As with any finish, chalked paint makes bare wood a bit rougher than it was before application as surface fibres swell, stand upright and harden that way.
The paint will be dry in a day. After that, use some fine sandpaper to smoothen the surface, knocking down the raised grain that developed. As you work, it's time to apply some artistry, too.
Sanding is what lets you create wear in areas where it could have happened naturally. The idea is to sand through the paint on corners and edges and chair rungs, but not to sand through the stain you applied earlier. Go gently at first since you can't easily put paint back if you've removed too much. Sand with 220-grit abrasives (always by hand for this job), stand back and look at the whole piece of furniture. Chances are good that you'll need to add more wear marks until the whole project sports the degree of distress that suits your taste.
Can any paint be used and rubbed down like this to create a worn look? No. You can try distressing, say, latex house paint, but it won't work well because this kind of paint (and most others) are made to resist wear and abrasion too well. Chalked paint, on the other hand, sands very willingly. If chalked paint sounds a lot like milk paint in how it behaves, that's because the two products are similar. I've come to prefer chalked paint because it comes premixed, unlike milk paint which comes as a powder that you mix with water. Chalked paint is also easier to find.
When you're satisfied with the look, vacuum off all the chalked paint dust, then seal the surface. My favourite for this application is wipe-on poly because it's so inconspicuous. You really can't tell it's there, except that the chalked paint surface is tougher and better protected. While it's true that a distressed chalked paint finish looks great when new, it only gets more interesting with wear and tear. Are there any other wood finishes that actually look better as they get worn? Steve Maxwell is always amazed at what a good wood finish can do. Visit him online at BaileyLineRoad.com for Canada's largest collection of hands-on, how-to articles and videos.