Feds look for answers
Investigators to question engineer driving train involved in deadly derailment
DUPONT, Wash. — Investigators are looking into whether the Amtrak engineer whose speeding train plunged off an overpass, killing at least three people, was distracted by the presence of an employee-in-training next to him in the locomotive, a federal official said Tuesday.
The official, who was not authorized to discuss the matter publicly and spoke on condition of anonymity, said investigators want to know whether the engineer lost “situational awareness” because of the second person in the cab.
The train was hurtling at 128 km/h in a 48 km/h zone Monday morning when it ran off the rails along a curve south of Seattle, Wash., sending some of its cars plummeting onto a highway below, National Transportation Safety Board member Bella DinhZarr said late Monday, citing data from the locomotive’s event recorder.
Dinh-Zarr said it is not yet known what caused the train to derail and it’s too early to say why it was going so fast. She said investigators will talk to the engineer and other crew members.
The engineer, whose name was not released, was bleeding from the head after the wreck, and his eyes were swollen shut, according to radio transmissions from a crew member. The transmissions mentioned a second person in the front of the train who was also hurt.
The train, with 85 passengers and crew members, was making the inaugural run along a fast new bypass route that was created by refurbishing freight tracks alongside Interstate 5. The 24-km, $180.7 million project was aimed at speeding up service by bypassing a route with a number of curves, single-track tunnels and freight traffic.
Positive train control (PTC) — technology that can automatically slow or stop a speeding train — wasn’t in use on that stretch of track. Track sensors and other PTC components have been installed, but the system isn’t expected to be completed until the spring, transit officials said.
Regulators have been pressing railroads for years to install such technology, and some have done so, but the deadline has been extended repeatedly at the industry’s request and is now the end of 2018.
The 7:34 a.m. accident left mangled train cars up on top of each other, with one hanging precariously over the freeway. The screech and clang of metal were followed by silence, then screams, as the injured cried out to rescuers and motorists pulled over and rushed to help.
In addition to those killed, more than 70 people were injured, 10 of them seriously.
Two of the dead were identified as train buffs who belonged to the rail advocacy group All Aboard Washington and were excited to be on board for the inaugural run: Jim Hamre, a retired civil engineer with the state Transportation Department, and Zack Willhoite, a customer service employee at a local transit agency.
“It’s pretty devastating. We’re having a tough time,” said All Aboard Washington executive director Lloyd Flem.
In 2015, an Amtrak train travelling at twice the 80 km/h speed limit ran off the rails along a sharp curve in Philadelphia, killing eight people. Investigators concluded the engineer was distracted by reports over the radio of another train getting hit by a rock.
Dinh-Zarr said it is too soon to say whether positive train control would have prevented Monday’s tragedy.