3D- printed glass optics created successfully

Washington, April 1: In a first, scientists have successfully 3D- printed opticalquality glasses at par with commercial products currently available on the market.

In a study published in the journal Advanced Materials Technologies, scientists from Lawrence Livermore National Laboratory ( LLNL) in the US described successfully printing small test pieces from lab- developed ink.

Since the refractive index of glass is sensitive to its thermal history, it can be difficult to ensure that glass printed from the molten phase will result in the desired optical performance, researchers said.

Depositing the LLNLdeveloped material in paste form and then heating the entire print to form the glass allows for a uniform refractive index, eliminating optical distortion that would degrade the optic’s function.

“Components printed from molten glass often show texture from the 3Dprinting process, and even if you were to polish the surface, you would still see evidence of the printing process within the bulk material,” said Rebecca Dylla- Spears, a chemical engineer at LLNL.

“This approach allows us to obtain the index homogeneity that is needed for optics. Now we can take these components and do something interesting,” said Dylla- Spears, the project’s principal investigator.

The custom inks, aimed at forming silica and silicatitania glasses, allow researchers the ability to tune the glass’s optical, thermal and mechanical properties, she said.

Researchers printed small, simple- shaped optics as proof of concept, but the technique eventually could be applied to any device that uses glass optics and could result in optics made with geometric structures and with compositional changes that were previously unattainable by conventional manufacturing methods.

Researchers printed small, simpleshaped optics as proof of concept, but the technique eventually could be applied to any device that uses glass optics and could result in optics made with geometric structures and with compositional changes that were previously unattainable Gradient refractive index lenses could be polished flat, replacing the polishing techniques used for traditional curved lenses

◗ ◗

For example, gradient refractive index lenses could be polished flat, replacing more expensive polishing techniques used for traditional curved lenses.

“Additive manufacturing gives us a new degree of freedom to combine optical materials in ways we could not do before,” Dylla- Spears, the project’s principal investigator said.

“It opens up a new design space that hasn’t existed in the past, allowing for design of both the optic shape and the optical properties within the material,” she said.