M4 driver is a straight shooter
COMPLEMENTING the M3 driver, the M4 driver differentiates its design by putting an emphasis on forgiveness with straight distance.
The M4 driver not only utilises Taylor Made’s most groundbreaking ’18 technologies, it also incorporates Geocoustic™ engineering, which combines geometry and acoustical engineering to unlock more forgiveness.
The Geocoustic sole shapes allow for a low CG and larger head size, but with a more curved sole which has inherently higher frequencies, leading to better sound and feel.
The Geocoustic sole design of the M4 driver allowed engineers to increase the overall face size.
Similar to the M3, the M4’s Hammerhead slot features reinforced outer portions for a lighter, more flexible face, which results in a larger sweet spot.
The centre portion of the slot increases ball speed low on the face and drops unwanted spin for straight distance.
Also new to the M4 is a redesigned face that is both thinner and lighter. The maximum thickness has been reduced significantly from 4.47mm to 3.6mm and the heel/ toe perimeter thickness has been reduced from 2mm to 1.92mm.
In addition, the mass of the face has been reduced from 45.5g in the ’17 M2 to 37.6g – 17.3%.
The M4 driver will be offered in a new 8.5°, 9.5°, 10.5° & 12° loft options, while LH models are available in 9.5° and 10.5°, each coming equipped with a Fujikura Atmos Red shaft in 6X, 5S, 5R, 5A along with a TM/Lamkin Dual Feel grip.
For women, the M4 driver is available in 10.5° & 12° lofts, equipped with a TM-Tuned 45 shaft.
RRP €415