DEMM Engineering & Manufacturing
New fixed input R3 series DC converters
MORNSUN’S FIXED input DC converters offer solutions to three common issues with power supply design.
These are short circuit protection where large capacitive loads make it difficult to coexist; a focus on high efficiency at full load whilst ignoring efficiency at low load; and standby current power consumption or in situations where large capacitors cannot be used as it may cause start up failure or destroy the converter.
Mornsun’s fixed input voltage DC/ DC converters R3 series have adopted IC technologies that decouple these conflicts whilst maintaining continuous short circuit protection, capacitive load and start- up capability which greatly resolves problems existing in the design.
Mornsun’s fixed input range of 1W DC/DC R3 converters free up your time from power supply design with a simple low cost and effective solution with a small foot print and offer a comprehensive range of cross industry SIP, DIP and SMD pin compatible packages.
Featuring high efficiencies at low and high load low standby power consumption, high capacitive loading up to 2400uf, short circuit protection with soft start up, and with UL62368/ EN62368 Certifications in place.
SIP Series A/B/E/F_ S-1WR3, B_ LS & IF_ LS-1WR3, IB_ S& IB_ LS-1WR3, DIP Series F05_ N-1WR3, SMD Series A/B/E/F/CF_ XT-1WR3 & IB_ XT-75WR3.
Mornsun is distributed throughout New Zealand and Australia by DLPC Pty Ltd.