SCANIA INTRODUCES DISENGAGEABLE TANDEM AXLE

Scania has introduced the RB662 tandem bogie axle with an optional lift-anddisengage function. When engaged, the new option can save up to 6% on fuel depending on operation and reduce the turning radius. Lifting takes less than 25 seconds and, with normal chassis height and tyres, ground clearance is nearly 70mm.

“That is substantial, especially when considering a return leg of 150 to 200km, as is often the case with timber trucks in Sweden. And, on top of that, you also get less tyre wear and increased manoeuvrability,” says Bo Eriksson, product manager, Scania Trucks.

The liftable and disengageable tandem bogie (LDTA) requires air suspension and will increase the truck’s kerb weight by 60kg. Most of the fuel savings can be attributed to the reduced friction inside the second (disconnected) axle gearing, with only some 10% of the saving derived from reduced rolling resistance. Three bogie weights – 19, 21 and 26 tonnes – are available and load limits with the second axle lifted are 9.5, 10.5 and 13 tonnes respectively.

A dog clutch connection is part of the option that makes the tandem axle both liftable and disengageable, thus offering substantial fuel savings, reduced tyre wear and much tighter turning radiuses.

The driver raises the axle by simply turning a knob. A pop-up warning appears in the instrument cluster if the truck identifies an overload situation, in which case it will not lift the axle. The lifting can be called for at any speed. The LDTA option can presently not be combined with hub reduction axles or tridem configurations.