How safe is your blanket?
Winter has well and truly set in, but before you crank up your trusty electric blanket, it’s important to make sure it’s in top shape for the months ahead.
Fire and Emergency New Zealand National Adviser for Fire Risk Management, Peter Gallagher, said there had been nine electric blanket fires in the past 12 months.
‘‘Electric blankets should be placed flat on beds and people should make sure that controls and cords are not twisted or caught between the mattress and the base of the bed.
‘‘At the first sign of wear, electric blankets should be checked by a qualified electrician.’’
How to check for damage
Before you fit the electric blanket to your bed, check the cord, control switch and plug for any signs of wear.
Also look for any kinks, exposed wires, or breaks in the heating element. Scorch marks are also a worrying sign.
Once you’ve done a visual check, Worksafe said a simple way to check for damage was to lay the blanket flat and turn it on for 15 minutes at the highest setting, while watching it carefully and then turning it off.
While the blanket is still warm, run your hand over it to find any hot spots.
‘‘A hot spot means the heating coil has been kinked or damaged,’’ Worksafe said on its website. ‘‘This could lead to fire or electric shock.’’
If you feel any hot spots or have any concerns about the safety of your blanket, have it checked by a licensed electrician or replace it.
Even if your electric blanket
If you feel any hot spots or have any concerns about the safety of your blanket, have it checked by a licensed electrician or replace it.
is still in relatively good condition, Fire and Emergency New Zealand recommends replacing it every five years as newer heat-protected models were safer.