Weekend Herald

Extra- sensory perception

HOW DO YOU KNOW WHEN YOUR CAR NEEDS TO SEE A TRANSMISSI­ON PHYSICIAN?

-

Sometimes cars develop a language of their own and, after they’ve been in your possession for a while, you become attuned to it, even if you don’t know what it means.

Technician­s have to be multilingu­al in car speak, but the average owner isn’t — they just know what seems normal and what doesn’t.

One of the more “vocal” parts of the car is its transmissi­on; and being able to interpret some of what it’s saying can save thousands of dollars in costs. If the engine seems to rev more than normal you may have a problem. LOOKING AFTER A VEHICLE IS ALL ABOUT THE SENSES — WHAT YOU SEE, HEAR, FEEL AND SMELL. IF YOU NOTICE ANYTHING THAT’S OUT OF THE ORDINARY THEN WE’D SUGGEST A PROMPT VISIT TO YOUR NEAREST WORKSHOP momentaril­y increase between gear changes due to the accelerato­r still being depressed, but a delay between gears allows the vehicle to rev before the next gear is fully engaged.

This shouldn’t be confused with CVT transmissi­on operation, where the revs will hold steady while the speed climbs. This can often translate as a slipping sensation, but doesn’t necessaril­y mean there’s a problem.

A common complaint for CVT vehicles is shuddering when moving off. This can be fixed by changing the fluid and adding an anti- shudder additive — but if more work is required this issue can be expensive. This one’s a bit easier to detect as there’s usually a noticeable clonk when engaging drive from park, reverse or neutral.

You might also experience harsh gear changes, disturbing an otherwise smooth drive. This could also be a symptom of a worn driveline component ( differenti­al or axle) that needs further investigat­ion. Sometimes there may be a delay in your vehicle’s transmissi­on changing. If you select reverse and accelerate but, instead of smooth movement, the car jolts forward and you hear a slight bang, it could be an indication of low or dirty fluid.

In the worst instance, it could be due to an internal component malfunctio­n. This is commonly found in used vehicles with high mileage and, until the vehicle can be repaired, you can help prevent further damage by delaying accelerati­on for a few seconds after the gear has been selected. A total loss of transmissi­on fluid is commonly caused by a split or perished cooler hose and will stop any vehicle dead in its tracks. Over time, a leak can do exactly the same thing, but it can potentiall­y cause more damage, as the transmissi­on has to work harder to try to maintain drive.

Slow leaks can be from a perished gasket or seal and can spread to look like a combinatio­n of leaks. Cleaning the transmissi­on housing will allow you to pinpoint the location of a leak. Buzzing noises from a transmissi­on could indicate low fluid. It can also highlight a problem with the fluid not being pumped properly due to a partially blocked pick- up or dented transmissi­on pan.

Burning smells can be caused by an overheated transmissi­on when towing, or it could also be a sign than a component is slipping and failing inside.

Transmissi­on fluid should be clear. If the fluid has turned a dark brown or black, it’s a good indication the transmissi­on has been worked hard.

For this reason an external transmissi­on fluid cooler may need to be fitted on vehicles that tow significan­t loads. It’s all about keeping the fluid temperatur­e down, particular­ly on a scorching summer day and in slow traffic.

Looking after a vehicle is all about the senses — what you see, hear, feel and smell.

If you notice anything that’s out of the ordinary then we’d suggest a prompt visit to your nearest workshop.

 ??  ??
 ??  ??

Newspapers in English

Newspapers from New Zealand