APPLY WATERSLIDE DECALS

1

After painting, this wagon received a high gloss clear coat via airbrush. This was allowed to cure for a few days. While the transfer soaked in a bowl of tepid water, Micro Set solution was brushed onto the model.

2

When the decal begins to work loose from the paper, it can be slid gently into position using a cocktail stick. Soak up the excess water with cotton swabs and make any adjustments, brushing on more water if necessary.

3

When in position, soak up the water and gently press the decal onto the surface. Use a dry, soft brush to disperse bubbles. After a few moments, brush a little more Micro Set over the decal and allow to dry naturally.

4

On uneven surfaces, Micro Sol can be applied to soften the film. After a few minutes, the decal can be pressed into the plank seams. If it resists, apply a little more. Allow to dry then seal with a clear varnish.