OIL AND GAS REPORT

PERMITS ISSUED DURING WEEK ENDING: JUNE 26, 2020.

The Arkansas Oil and Gas Commission last week issued one drilling permit and six well recompletions. By county, they were:

DRILLING PERMITS

SEBASTIAN — Oxley Energy, LLC of Fort Smith for Gilmore 2. in Middle Atoka Form. of B-44 Fld. Drilled to TVD: 4900 ft. perf. 2730 ft. FSL &2031 ft. FWL of Sec. 1-6N-32W. Contractor: Virtue Oilfield Rentals, LLC; workover done June 28.

WELL RECOMPLETIONS

COLUMBIA — Mission Creek OPCO LLC of Magnolia for DMCVU

No. 83, 24-hr. prod. not available in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to TD: 7,190 ft., perf. 6,716-7,020 OA ft. of Sec. 15-18S-22W. Workover done March 26.

Mission Creek OPCO LLC for DMCVU No. 97, 24-hr. prod. 1.7 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,622 ft., perf. 6,662-8,504 OA ft. of Sec. 15-18S-22W. Workover done April 23.

Mission Creek OPCO LLC for DNCVU No. 59, 24-hr. prod. 6.6 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,630 ft., perf. 7,031-7,053 OA ft. of Sec. 11-18S-22W. Workover done April 23.

Mission Creek OPCO LLC for Phillips-Caldwell No. 6, 24-hr. prod. 3.37 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,565 ft., perf. 7,066—7,074 ft. of Sec. 18-18S-21W. Workover done April 1.

Mission Creek OPCO LLC for Willis C No. 6, 24-hr. prod. 9.43 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,780 ft., perf. 8,1588,173 ft. of Sec. 17-18S-21W. Workover done March 31.

Mission Creek OPCO LLC for Snider Wise A’ No.1, 24-hr prod. 8.34 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled To TD: 8,670 ft., perf. 6,830-6,842’ of Sec. 20-18S-21W.

Workover done March 20.

ABBREVIATIONS

Loc. — location; Perf. — perforations; FEL — from the east line; FNL — from the north line; FSL — from the south line; FWL — from the west line; FEUL — from the east unit line; FWUL — from the west unit line; FNUL — from the north unit line; FSUL — from the south unit line; MCF — thousand cubic feet; bbl — barrel; MD — measured depth; TD — total depth; TVD — true vertical depth; PBTD — plug back total depth; BHL — bottom hole location; PBHL — proposed bottom hole location; SHL — surface hole location; OA — overall; N/A — not available.