How to address mold after a flood

Floods can quickly turn lives upside down. According to the World Health Organization, more than 2 billion people were affected by floods between 1998 and 2017, and those people no doubt recognize just how unsettling floods can be. The damage caused by flooding can linger long after water levels have subsided.

Mold left in the wake of a flood poses a significant threat, and WebMD notes that mold can be especially dangerous for people with respiratory issues such as allergies or asthma. In fact, the Centers for Disease Control and Prevention notes that, in the wake of Hurricane Katrina, one of the organization’s chief concerns was to let those affected by the storm learn how to safely clean up mold.

Mold cleanup must be done with a sense of urgency, as WebMD indicates that mold can grow very quickly in damp environments. That said, it is vital that homeowners only re-enter flooded properties when it is safe to do so.

The CDC recommends the following approach to address mold after a flood.

• Wear personal protective equipment: Gloves, masks and goggles should be worn to protect the eyes, nose, mouth and skin. While personal protective equipment can be highly effective, anyone with mold allergies or pre-existing respiratory conditions should leave mold cleanup to the professionals.

• Discard certain items: Items that are wet with flood water but cannot be cleaned and completely dried within 24 to 48 hours should be discarded. People with flood-insurance policies may need to take photos of items prior to discarding them if they hope to be reimbursed.

• Open doors and windows: The Federal Emergency Management Agency notes that airing the home out by opening the doors and windows can inhibit mold growth when humidity levels are lower outside than inside.

• Circulate air around the house: If it is safe to turn the electricity back on, circulate air inside the home with fans. In addition, use a dehumidifier to remove moisture from inside the home.

• Do not mix cleaning products: The CDC notes the dangers associated with mixing cleaning products. For example, mixing bleach with ammonia can produce toxic vapors.

• Scrub surfaces: Use clean water and detergent to remove all visible mold from surfaces around the house. Dry the surfaces immediately after cleaning them.

• Avoid refurbishing until all mold has been removed: Mold can grow even if it has been painted or caulked over. The CDC urges anyone tasked with addressing flood-related mold to make sure surfaces are completely cleaned and dried prior to refurbishing rooms.

• Dry the home as quickly as possible: Drying the home as quickly as possible, ideally within 24 to 48 hours of the occurrence of flooding, can inhibit further mold growth. However, it is imperative that residents only re-enter a home after getting the go-ahead from local authorities.