Hydrant flushing
During the week of Oct. 8-12, the Bellbrook Service Department will be flushing fire hydrants between the hours of 8:30 a.m. and 3:30 p.m. The purpose of water system flushing is to verify the safe operation of hydrants and valves; to remove accumulated sediment or mineral buildup in the bottom of our water mains, to flush stale water from deadend streets, restore or help maintain chlorine residual throughout the water system and continue maintaining a clean water supply to customers.
The water flushing may result in temporary discoloration of the water, as well as possible reduction in water pressure. The water discoloration is not a health risk. The Service Department recommends restricting your water usage and setting water softeners to bypass. The discolored water may stain your laundry, especially white materials as well as the possible staining of plumbing fixtures. Therefore, please avoid doing laundry during the noted flushing period and certainly while such conditions exist.
Prior to washing clothes, including times after the hours stated in this notice, please check the cold water for possible discoloration. If the water is discolored, let the cold water run for a minute or two to begin clearing. If the water does not clear at that time, try again later. Please check your water carefully prior to doing laundry and inspect the laundry before it is dried.
For more information, call the Utility Billing office at 937-8484638.